REVIEWED SCIENTIFIC JOURNALS

Reviewed Scientific Journals

 

2020

 

Aburaia, M., Bucher, C.M., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H., Lammer, H.: A Production Method for Standardized Continuous Fiber Reinforced FFF Filament. Biomaterials and Medical Applications, https://doi.org/10.37532/bma.2020.4(1).123, 20.05.2020, akzeptiert

 

Arminger, B., Jaxel, J., Bacher, M., Gindl-Altmutter, W., Hansmann, C.: On the drying behavior of natural oils used for solid wood finishing. Progress in Organic Coatings, 148, 105831, 10.06.2020, veröffentlicht

 

Aufischer, G., Kamm, B., Paulik, C.: Polycondensation of kraft-Lignin towards value-added biomaterials: carbonaerogels. International Journal of Biobased Plastic, akzeptiert

 

Barbini, S., Sriranganadane, D., España-Orozco, S., Kabrelian, A., Karlström, K., Rosenau, T., Potthast, A.: Tools for bark biorefineries: Studies towards improved characterization of lipophilic lignocellulosic extractives by combining supercritical fluid and gas chromatography. ACS Sustainable Chemistry & Engineering, akzeptiert

 

Bauernfeind, C.M., Zimek, M., Lettner, M, Hesser, F., Baumgartner, R.J., Stern, T.: Comparing the incomparable? A review of methodical aspects in the sustainability assessment of wood in vehicles. The International Journal of Life Cycle Assessment, 25, 2217-2240, 14.09.2020, veröffentlicht

 

Benthien, J., Riegler, M., Engehausen, N., Nopens, M.: Specific Dimensional Change Behavior of Laminated Beech Veneer Lumber (BauBuche) in Terms of Moisture Absorption and Desorption. Fibres, 8, 47, 16.07.2020, veröffentlicht

 

Bliem, P., Frömel-Frybort, S., van Herwijnen, H.W.G., Mauritz, R., Müller, U., Teischinger, A., Konnerth, J.: Holzwerkstoff basierend auf Partikeln hergestellt mittels einer neuartigen, nicht schneidenden Zerteilungstechnologie. Holztechnologie, 61, 3, 30-38, August 2020, veröffentlicht

 

Bockel, S., Harling, S., Konnerth, J., Niemz, P., Weiland, G., Hogger, E., Pichelin, F.: Modifying elastic modulus of two-component polyurethane adhesive for structural hardwood bonding. Journal of Wood Science, DOI: 10.1186/s10086-020-01917-9, 66, 29.09.2020, veröffentlicht

 

Breitenbach, S., Lumetzberger, A., Hobisch, M.A., Unterweger, C., Spirk, S., Stifter, D., Fürst, C., Hassel, A.W.: Supercapacitor Electrodes from Viscose-based Activated Carbon Fibers: Significant Yield and Performance Improvement using Diammonium Hydrogen Phosphate as Impregnating Agent. C - Journal of Carbon Research, https://www.mdpi.com/2311-5629/6/2/17#, 1-12, 27.03.2020, veröffentlicht

 

Chebaeva, N., Lettner, M., Wenger, J., Schöggl, J.P., Hesser, F., Holzer, D., Stern, T.: Dealing with the eco-design paradox in research and development projects: The concept of sustainability assessment levels. Journal of Cleaner Production, 125232, 23.11.2020, veröffentlicht

 

Chizzola, R., Müllner, K.: Variability of volatiles in Pinus cembra L. within and between trees from a stand in the Salzburg Alps (Austria) as assessed by essential oil and SPME analysis. Genet. Resources and Crop Evolution, https://doi.org/10.1007/s10722-020-01006-2, 16.09.2020, veröffentlicht

 

Ekbote, G.S., Khalifa, M., Mahendran, A.R., Anandhan, S.: Cationic Surfactant Assisted Enhancement of Dielectric and Piezoelectric Properties of PVDF nanofibers for Energy Harvesting Application. Soft Matter, 26.12.2020, veröffentlicht

 

España-Orozco, S., Zeitlinger, P., Fackler, K., Bischof, R.H., Potthast, A.: A solid-phase extraction method that eliminates matrix effects of complex pulp mill effluents for the analysis of lipophilic wood extractives. Nordic Pulp & Paper Research Journal, akzeptiert

 

Gindl-Altmutter, W., Czabany, I., Unterweger, C., Gierlinger, N., Xiao, N., Bodner, S.C., Keckes, J.: Structure and electrical resistivity of individual carbonised natural and man-made cellulose fibres. Journal of Materials Science, https://link.springer.com/content/pdf/10.1007%2Fs10853-020-04743-y.pdf, 55, 10271-10280, 12.05.2020, veröffentlicht

 

Goto, T., Zaccaron, S., Bacher, M., Hettegger, H., Potthast, A., Rosenau, T.: On nitrogen fixation and “residual nitrogen content” in cellulosic pulps. Carbohydrate Polymers, 253, 117235, 01.02.2021, veröffentlicht online

 

Herzele, S., van Herwijnen H.W.G., Griesser, T., Gindl-Altmutter, W., Rößler, C., Konnerth, J.: Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno) cellulosic surfaces revealed by nanoindentation. International Journal of Adhesion and Adhesives, 98, 102507, Jänner 2020, veröffentlicht

 

Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formakdehyd Harzen. Holztechnologie, 61, 3, 43-48, August 2020, veröffentlicht

 

Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Systematic assessment of wheat extenders in formaldehyde-condenstation plywood resins: Part I - physico-chemical adhesive properties. The Journal of Adhesion, DOI: 10.1080/00218464.2020.1776123, 14.06.2020, veröffentlicht

 

Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Systematic assessment of wheat extenders in formaldehyde-condenstation plywood resins: Part II - mechanical properties of plywood panels. The Journal of Adhesion, https://doi.org/10.1080/00218464.2020.1756788, 30.04.2020, veröffentlicht

 

Janakiraman, S., Khalifa, M., Biswal, R., Ghosh, S., Anandhan, S., Venimadhav, A.: High Performance electrospn nanofiber coated polypropylene membrane as a separator for sodium ion batteries. Journal of Power Sources, 460, 2020, 228060, 15.03.2020, akzeptiert

 

Janesch, J., Arminger, B., Gindl-Altmutter, W., Hansmann, C.: Superhydrophobic coatings on wood made of plant oil and natural wax. Progress in Organic Coatings, 148, 105891, November 2020, veröffentlicht

 

Janesch, J., Czabany, I., Hansmann, C., Mautner, A., Rosenau, T., Gindl-Altmutter, W.: Transparent layer-by-layer coatings based on biopolymers and CeO2 to protect wood from UV light. Progress in Organic Coatings, 138, 105409, Jänner 2020, veröffentlicht

 

Janesch, J., Jones, M., Bacher, M., Kontturi, E., Bismarck, A., Mautner, A.: Mushroom-derived chitosan-glucan nanopaper filters for the treatment of water. Reactive and Functional Polymers, 146, 104428, Jänner 2020, veröffentlicht

 

Jaxel, J., Guggenberger, M., Rosenau, T., Böhmdorfer, S.: Unbreakable and customizable dipping chambers for TLC and HPTLC manufactured by fused deposition modelling. Talanta, https://doi.org/10.1016/j.talanta.2020.121072, 21.04.2020, veröffentlicht

 

Jaxel, J., Liebner, F., Hansmann, C.: Solvent-Free Dyeing of Solid Wood in Water-Saturated Supercritical Carbon Dioxide. ACS Sustainable Chemistry and Engineering, 8, 5446-5451, 30.03.2020, veröffentlicht

 

Kain S., Ecker J.V., Haider A., Musso M., Petutschnigg A.: Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites. European Journal of Wood and Wood Products, https://doi.org/10.1007/s00107-019-01473-0, 78 (2), 65-74, 01.01.2020, veröffentlicht

 

Khalifa, M., Anandhan, S.: PVDF Nanofibers with embedded polyanyiline- Graphitic Carbon Nitride Nanosheet Composites for Piezolectric energy Conversion. Applied Nano Materials, 16.10.2019, akzeptiert

 

Khalifa, M., Anandhan, S., Wuzella, G., Lammer, H., Mahendran, A.R.: Thermoplastic Polyurethane Composites Reinforced with Renewable and Sustainable Fillers-A Review. Polymer-Plastics Technology and Engineering, https://doi.org/10.1080/25740881.2020.1768544, 04.06.2020, veröffentlicht

 

Khalifa, M., Ekbote, G., Anandhan, S., Wuzella, G., Lammer, H., Mahendran, A.R.: Physico-chemical Characteristics of Bio-Based Thermoplastic Polyurethane/ Graphene Nanocomposite for Piezo-resistive Strain Sensor. Journal of Applied Polymer Science, https://doi.org/10.1002/app.49364, 02.05.2020, akzeptiert

 

Khalifa,M., Wuzella, G., Lammer, H., Mahendran, A.R.: Smart Paper from Graphene Coated Cellulose for High-Performance Humidity and Piezoresistive Force Sensor. Synthetic Metals, 266, 01.08.2020, veröffentlicht

 

Leßlhumer, J., Reif, M., Haider, A.: Comprehensive characterization of WPC materials. Holztechnologie, Oktober 2020, veröffentlicht

 

Lettner, M., Hesser, F., Hedeler, B., Schwarzbauer, P., Stern, T.: Barriers and incentives for the use of lignin-based resins: Results of a comparative importance performance analysis. Journal of Cleaner Production, 256, 120520, 01.02.2020, veröffentlicht

 

Lindemann, M., Widhalm, B., Kuncinger, T., Srebotnik, E.: An integrated process for combined microbial VOC reduction and effluentvalorization in the wood proucessing industry. Bioresource Technology Reports, https://doi.org/10.1016/j.biteb.2020.100471, 06.06.2020, veröffentlicht

 

Lucia, A., Bacher, M., van Herwijnen, H.G.W., Rosenau, T.: A Direct Silanization Protocol for Dialdehyde Cellulose. Molecules, 25, 2458, 25.05.2020, veröffentlicht

 

Lucia, A., van Herwijnen, H.W.G., Kantner, W., Rosenau, T.: Wood-based resins and other bio-based binders for the production of mineral wool: a mini-review. Holzforschung, https://doi.org/10.1515/hf-2019-0280, 28.02.2020, veröffentlicht

 

Masiero, M., Secco, L., Pettenella, D., Da Re, R., Bernö, H., Carreira, A., Dobrovolsky, A., Giertlieova, B.: Bioeconomy perception by future stakeholders: Hearing from European forestry students. AMBIO - A Human Environment Journal, 49, 1925-1942, 13.10.2020, veröffentlicht

 

Milakin, K.A., Gavrilov, N., Pašti, I.A., Morávková, Z., Acharya, U., Unterweger, C., Breitenbach, S., Zhigunov, A., Bober, P.: Polyaniline-metal organic framework (Fe-BTC) composite for electrochemical applications. Polymer, 208, 122945, 25.08.2020, veröffentlicht

 

Milakin, K.A., Trchová, M., Acharya, U., Breitenbach, S., Unterweger, C., Hodan, J., Hromádková, J., Pfleger, J., Stejskal, J., Bober, P.: Effect of initial freezing temperature and comonomers concentration on the properties of poly(aniline-co-m-phenylenediamine) cryogels. Colloid and Polymer Science, https://doi.org/10.1007/s00396-020-04608-5, 08.02.2020, veröffentlicht

 

Minisy, I.M., Acharya, U., Unterweger, C., Breitenbach, S., Zhigunov, A., Bober, P., Kobera, L., Trchová, M., Brus, J., Pfleger, J., Stejskal, J.: Highly conducting 1-D polypyrrole prepared in the presence of safranin. Journal of Materials Chemistry C, 8, 12140-12147, 24.07.2020, veröffentlicht

 

Perić, M., Putz, R., Paulik, C.: 3D-Printed PLA Filaments Reinforced with Nanofibrillated Cellulose. Journal of Renewable Materials, Vol. 8, 7, 759-772, 01.06.2020, veröffentlicht

 

Pinkl, S., van Herwijnen, H.W.G., Veigel, S., Gindl-Altmutter, W., Riegler, M.: Effects of fibrillar cellulosic additives on particleboard production and properties. Wood Material Science & Engineering, https://doi.org/10.1080/17480272.2020.1786722, 02.07.2020, veröffentlicht

 

Policardi, F., Thebault, M.: The Buffer Effect of Different Wood Species and the Influence of Oak on Panel Composites Binders. Polymers, https://doi.org/10.3390/polym12071540, 12.07.2020, veröffentlicht

 

Ranacher, L., Pollakova, A., Liebal, S., Weber, N., Schwarzbauer, P., Hesser, F.: Farmers’ willingness to adopt short rotation plantations on marginal lands: qualitative study about incentives and barriers in Slovakia. BioEnergy Research, akzeptiert

 

Ranacher, L., Sedmik, A., Schwarzbauer, P.: Public perceptions of forestry and the forest-based bioeconomy in the European Union. Knowledge to Action 3, European Forest Institute, 27.10.2020, veröffentlicht

 

Ranacher, L., Wallin, I., Valsta, L., Kleinschmit, D.: Social dimensions of the forest-based bioeconomy. AMBIO - A Human Environment Journal, 49, 1851-1859, 13.10.2020, veröffentlicht

 

Rößler, C., Breitenecker, F., Riegler, M.: Simulating the Gluing ofWood Particles by Lattice Gas Cellular Automata and Random Walk. Mathematics, 8, 988, 16.06.2020, veröffentlicht

Sarosi, O.P., Bischof, R.H., Potthast, A.: Tailoring Pulp Cellulose with Electron Beam Irradiation: Effects of Lignin and Hemicellulose. ACS Sustainable Chem. Eng., 7235–7243, 14.04.2020, veröffentlicht

 

Savandaiah, C., Maurer, J., Gall, M., Haider, A., Steinbichler, G., Sapkota, J.: Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/Carbon fiber composites fabricated by material extrusion additive manufacturing. Applied Polymer Science, https://doi.org/10.1002/app.50243, 25.10.2020, veröffentlicht

 

Schlackl, K., Bischof, R.H., Fackler, K., Samhaber, W.: Impact of intermolecular interactions on the nanofiltration of pulping liquor. Separation and Purification Technology, 29.05.2020, veröffentlicht online

 

Schlackl, K., Bischof, R.H., Samhaber, W.: Negative retention by the nanofiltration of aqueous biomass hydrolysates derived from wood pulping. Separation and Purification Technology, Vol. 242, 28.02.2020, veröffentlicht

 

Seidl, R., Weiss, S., Zikulnig-Rusch, E.M., Kandelbauer, A.: Response Surface Optimization for improving the processing behaviour of melamine formaldehyde impregnation resins. Journal of Applied Polymer Science, https://doi.org/10.1002/app.50181, 27.10.2020, veröffentlicht

 

Shamitha, C., Mahendran, A.R., Anandhan, S.: Effect of polarization switching on piezoelectric and dielectric performance of electrospun nanofabrics of poly(vinylidene fluoride)/Ca-Al LDH nanocomposite. Journal of Applied Polymer Science, Vol. 137, Issue20, 08.11.2019, akzeptiert

 

Shetty,S., Ekbote, G.S., Mahendran, A.R., Anandhan, S.: Polymorphism, dielectric and piezoelectric response of organo-modified Ni–Co layered double hydroxide nanosheets dispersed electrospun PVDF nanofabrics. Journal of Materials Science: Materials in Electronics, Vol. 30, 20703-20715, 05.09.2019, akzeptiert

 

Shetty,S., Mahendran, A.R., Anandhan, S.: Development of a new flexible nanogenerator from electrospun nanofabric based on PVDF/talc nanosheet composites. Soft Matter, https://doi.org/10.1039/D0SM00341G, Mai 2020, veröffentlicht

 

Singh, R., Janakiraman, S., Khalifa, M., Anandhan, S., Ghosh, S., Venimadhav, A., Biswas, K.: A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery. Journal of Materials Science: Materials in Electronics, Vol. 31, 22912 - 22925, veröffentlicht

 

Singh, R., Janakiraman, S., Khalifa, M., Anandhan, S., Ghosh, S., Vanimadhev, A., Biswas, K.: An electolyte ß-Phase polyvinylidene fluoride as gel poylmer electrolyte for magenesium -ion battery application. Journal of Electroanalytical Chemistry, https://doi.org/10.1016/j.jelechem.2019.113417, 10.10.2019, akzeptiert

 

Solt, P., Libowitzky, S., van Herwijnen, H.W.G., Konnerth, J.: Improved method for analyzing cohesive strength development of pMDI. Wood Science and Technology, 54, 7-17, Jänner 2020, veröffentlicht

 

Stern, T., Wenger, J., Asada, R., Mair-Bauernfeind, C., Haas, V., Popowicz, M., Ranacher, L., Hesser, F., Kriechbaum, M.: Bioökonomie im waldbasierten Sektor: inkrementeller oder disruptiver Wandel? Schweizerische Zeitschrift für Forstwesen (SZF), 172 (1), 16-24, 01.01.2021, veröffentlicht

 

Stockinger, T., Liedl, B., Steiner, M., Schwödiauer, R., Padinger, F., Bauer, S., Kaltenbrunner, M., Müller, U.: Printed sensors on paper and wood - The frugal way of in-line detection to characterize the crosslinking behaviour of water-based glues. Sensors and Actuators B: Chemical, https://doi.org/10.1016/j.snb.2020.128750, 01.12.2020, veröffentlicht

 

Süss, R., Kamm, B., Arnezeder, D., Zeilerbauer, L., Paulik, C.: Homogenously catalyzed depolymerization of lignin from arganosolv medium: charakterization, optimazion and minimazion of coke formation. The Canadien Journal of Chemical Engineering, akzeptiert

 

Thébault, M., Kutuzova, L., Jury, S., Eicher, I., Zikulnig-Rusch, E.M., Kandelbauer, A.: Effect of phenolation, Lignin-type and degree of substitution on the wetting behavior, rheological properties and thermal curing profiles of Lignin-modified phenol-formaldehyde impregnation resins. Journal of Renewable Materials, https://doi.org/10.32604/jrm.2020.09616, 24.03.2020, veröffentlicht

 

Thébault, M., Li, Y., Beuc, C., Frömel-Frybort, S., Zikulnig-Rusch, E.M., Kutuzova, L., Kandelbauer, A.: Impregnated paper-based decorative laminates prepared from lignin-substituted phenolic resins. Journal of Renewable Materials, DOI: 10.32604/jrm.2020.09755, August 2020, akzeptiert

 

Thoma, C., Konnerth, J., Sailer-Kronlacher, W., Rosenau, T., Potthast, A., van Herwijnen, H.W.G.: Hydroxymethylfurfural and its derivates: Potential as key reactant in adhesives. ChemSusChem, 13, 20, 5408-5422, 05.08.2020, veröffentlicht

 

Thoma, C., Konnerth, J., Sailer-Kronlacher, W., Solt-Rindler, P., Rosenau, T., van Herwijnen, H.W.G.: Current situation of the challenging scale-up development of hydroxymethylfurfural production. ChemSusChem, 13, 14, 3544-3564, 17.04.2020, veröffentlicht

 

Unterweger, C., Mayrhofer, T., Piana F., Duchoslav, J., Stifter, D., Fürst, C.: Impact of fiber length and fiber content on the mechanical properties and electrical conductivity of short carbon fiber reinforced polypropylene composites. Composites Science and Technology. https://doi.org/10.1016/j.compscitech.2020.107998, 1-8, 09.01.2020, veröffentlicht

 

Urdl, K., Christöfl, P., Weiss, S., Kandelbauer, A., Müller, U., Kern, W.: Thermomechanical and microhardness data of melamine-formaldehyde-based self-healing resin film able to undergo reversible crosslinking via Diels-Alder reaction. European Polymer Journal, https://doi.org/10.1016/j.dib.2020.106559, 16.11.2020, veröffentlicht

 

Urdl, K., Weiss, S., Christöfl, P., Kandelbauer, A., Müller, U., Kern, W.: Diels-Alder modified self-healing melamine resin. European Polymer Journal, https://doi.org/10.1016/j.eurpolymj.2020.109601, 06.03.2020, veröffentlicht

 

Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukanszky, B.: Comparative study of fiber reinforced PP composites: effect of fiber type, coupling and failure mechanisms. Composites Part A, Applied Science and Manufacturing, https://doi.org/10.1016/j.compositesa.2020.105895, Vol. 133, Juni 2020, veröffentlicht

 

Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukanszky, B.: Reinforcement of PP with Polymer Fibers: Effect of Matrix Characteristics, Fiber Type and Interfacial Adhesion. Polymer, https://doi.org/10.1016/j.polymer.2020.122203, 24.01.2020, veröffentlicht

 

Várdai, R., Milán, F., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukánszky, B.: Effect of Various Organic Fibers on the Stiffness, Strength and Impact Resistance of Polypropylene. Polymer International, http://dx.doi.org/10.1002/pi.6105, 08.09.2020, veröffentlicht

 

Weiss, R., Eischer, A., Tadic, T., Ortner, M., Prallc, K., Neunteufel, E., Putz, R., Guebitz, G.M., Nyanhongo, G.S.: Valorisation of slaughter house and deinking paper waste streams for the production of enzyme by Trichoderma reesei. Journal of Cleaner Production, Vol. 275, 01.12.2020, veröffentlicht

 

Weiss, S., Seidl, R., Kessler, W., Kessler, R., Zikulnig-Rusch, E.M., Kandelbauer, A.: Unravelling the Phases of Mealmine Formaldehyde Resin Cure by Infrared Spectroscopy (FTIR) and Multivariate Cure Resolutin (MCR). Polymers, https://doi.org/10.3390/polym12112569, 02.11.2020, veröffentlicht

 

Wuzella, G., Mahendran, A.R., Beuc, C., Lammer, H.: Isoconversional cure kinetics of a novel thermosetting resin based on linseed oil. Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-020-09529-7, 18.03.2020, veröffentlicht

 

Wuzella, G., Mahendran, A.R., Kandelbauer, A.: Green composite material made from Typha latifolia fibres bonded with an epoxidized linseed oil / tall oil-based polyamide binder system. Journal of Renewable Materials, Vol. 8, No. 5, 2020, 499-512, 29.04.2020, veröffentlicht

 

Yao, Y., Li, M., Lackner, M., Lammer, H.: A continuous fiber-reinforced additive manufacturing processing based on PET fiber and PLA. Additive Manufacturing Materials and Their Applications, akzeptiert

 

Zhang, H., Liu, D., Huang, T., Hu, Q., Lammer, H.: Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine. Materials, 13, 1678, 15.04.2020, akzeptiert

 

Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J., Lammer, H.: Research and implementation of axial 3D printing method for PLA pipes. Materials, akzeptiert