REVIEWED SCIENTIFIC JOURNALS

Reviewed Scientific Journals

 

2019

 

Accastello, Ch., Bieniasz, A., Blaško, R., Lula, M., Pszenny, D., Sallustio, L., Šimunović, N., Vošvrdová, N., Speelman, E.N.: Conflicting demands on the natural resources in Northern Sweden: a participatory scenario development study. Journal of Environmental Assessment Policy and Management, 31.10.2019, veröffentlicht

 

Alzagameem, A., Klein, S.E., Bergs, M., Xuan-Tung, Do., Korte, I., Dohlen, S., Hüwe, C., Kreyenschmidt, J., Kamm, B., Larkins, M., Schulze, M.: Antimicrobial Activity of Lignin and Lignin-Derived Cellulose and Chitosan Composites Against Selected Pathogenic and Spoilage Microorganisms. Polymers, Vol 11, 09.04.2019, veröffentlicht online       

 

Anusic, A., Resch-Fauster, K., Mahendran, A.R., Wuzella, G.: Anhydride Cured BioBased Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties. Macromolecular Materials and Engineering. DOI: 10.1002/mame.201900031, 25.04.2019, veröffentlicht

 

Arminger, B., Gindl-Altmutter, W., Keckes, J., Hansmann, C.: Facile preparation of superhydrophobic wood surfaces via spraying of aqueous alkyl ketene dimer dispersions. RSC Advances. 9, 54, 24357-24367, 06.08.2019, veröffentlicht

 

Bliem, P., Konnerth, J., Frömel-Frybort, S., Gartner, C., Mauritz, R., van Herwijnen, H.W.G.: Influence of drying and curing parameters on phenol-formaldehyde impregnated wood veneers. The Journal of Adhesion, DOI: https://doi.org/10.1080/00218464.2019.1657015, 22.08.2019, veröffentlicht online

 

Bliem, P., Frömel-Frybort, S., van Herwijnen, H.W.G., Pinkl, S., Krenke, T., Mauritz, R., Konnerth, J.: Engineering of material properties by adhesive selection at the example of a novel structural wood material. The Journal of Adhesion, DOI: https://doi.org/10.1080/00218464.2019.1664301, 11.09.2019, veröffentlicht online

 

Bober, B., Minisy, Islam M.M., Nemanja Gavrilov, N., Acharya, U., Morávková, Z., Unterweger, Ch., Mičušík, M., Filippov, S.K., Kredatusová. J., Pašti, I.A., Breitenbach, S., Ćirić-Marjanović, G., Stejskal, J.: Tailoring of carbonized polypyrrole nanotubes core by different polypyrrole shells for oxygen reduction reaction selectivity modification. Journal of Colloid and Interface Science, 551, 184-194, Mai 2019, veröffentlicht

 

Burzic, I., Pretschuh, C., Kaineder, D., Eder, G., Smilek, J., Másilko, J., Wöss, K.: Impact modification of PLA using biobased biodegradable PHB bio-polymers. European Polymer Journal, 114, 32-38, 15.02.2019, veröffentlicht

 

Ecker, J., Burzic, I., Hild, S., Haider, A., Rennhofer, H.: Improving the impact strength of PLA and its blends with PHA in fused layer modelling. Polymer Testing, 78, 105929, 25.06.2019, veröffentlicht

 

España Orozco, S., Fitz, E., Ritzberger, J., Möderl, S., Bischof, R.H.: Pine resin components are degraded at different rates during outdoor seasoning for dissolving wood pulp production. Lenzing Berichte, Vol. 95, akzepiert

 

Friebel, C., Bischof, R.H., Schild, G., Fackler, K., Gebauer, I.: Effects of Caustic Extraction on Properties of Viscose Grade Dissolving Pulp. Processes MDPI, Vol. 7, Issue 3, 27.02.2019, veröffentlicht

 

Gindl-Altmutter, W., Köhnke, J., Unterweger, Ch., Gierlinger, N., Keckes, J., Zalesak, J., Rojas, O.: Lignin-based multiwall carbon nanotubes. Composites Part A, 121, 175-179, 01.03.2019, veröffentlicht

 

Hassan, A., Minimi, V., Schild, D., Rinner, U., Bacher, M., Potthast, A., Rosenau, T.: Gram-scale economical synthesis of selectively protected trans-coniferyl alcohol and its corresponding thiol. Holzforschung, 01.03.2019, veöffentlicht online

 

Hinterreiter, A.P., Duchoslav, J., Kehrer, M., Truglasm, T., Lumetzberger, A., Unterweger, Ch., Fürst, Ch., Stifter, D.: Determination of the surface chemistry of ozone-treated carbon fibers by highly consistent evaluation of X-ray photoelectron spectra. Carbon, 146, 97-105, 01.02.2019, veröffentlicht

 

Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Influence of cold tack properties on bond performance of cured urea formaldehyde resin. European Journal of Wood and Wood Products, 77, 487-490, 01.03.2019, veröffentlicht

 

Jaxel, J., Fontaine, L., Krenke, T., Hansmann, C., Liebner, F.: Bio-inspired lipophilization of wood for scCO2-assisted colouring with disperse dyes. Journal of Supercritical Fluids, 147, 116-125, Mai 2019, veröffentlicht

 

Jaxel, J., Rodriguez, J., Rerat, A., Rosenau, T., Hansmann, C., Liebner, F., Böhmdorfer, S.: Robust and fast absolute quantification of a wood surface coating by densitometry. Applied Surface Science, https://doi.org/10.1016/j.apsusc.2019.144568, 144568 (article number), 13.11.2019, veröffentlicht

 

Jaxel, J., Amer, H., Bacher, M., Roller, A., Guggenberger, M., Zwirchmayr, N., Hansmann, C., Liebner, F.: Facile synthesis and characterisation of various anthraquinone-based disperse dyes for supercritical carbon dioxide dyeing. Dyes and Pigments. https://doi.org/10.1016/j.dyepig.2019.107991, 173, 107991 (article number), 23.10.2019, veröffentlicht

 

Khalifa, M., Mahendran, A.R., Anandhan, S.: Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator. Journal of Polymer Research, online: DOI: 10.1007, s10965, 019, 1738-0, März 2019, 26:73, veröffentlicht

 

Köhnke, J., Gierlinger, N., Prates Mateu, B., Unterweger, Ch., Solt, P., Mahler, K., Liebner, F., Gindl-Altmutter, W.: Comparison of four technical lignins as resource for electrically conductive carbon particle. Bioresources, DOI: 10.15376/biores.14.1.1091-1109, 1091-1109, 01.02.2019, veröffentlicht

 

Lems, E., Winklehner, S., Hansmann, C., Gindl-Altmutter, W., Veigel, S.: Reinforcing effect of poly(furfuryl alcohol) in cellulose based porous materials. Cellulose, 26, 7, 4431–4444, Mai 2019, veröffentlicht

 

Lindemann, M., Kuncinger, T., Rieder-Gradinger, C., Srebotnik, E.: Selective recovery of polyphenols from MDF process waters by adsorption on a macroporous, crosslinked pyrrolidonebased resin. Holzforschung, DOI: https://doi.org/10.1515/hf-2018-0229, 15.03.2019, veröffentlicht online

 

Lorke, S., Müller, U., Meissl, R., Brüggemann, O.: Covalent cross-linking of polymers at room temperature International Journal of Adhesion and Adhesives. 91, 150-159, https://doi.org/10.1016/j.ijadhadh.2019.03.011, Juni 2019, veröffentlicht

 

Lucia, A., van Herwijnen, H.W.G., Oberlerchner, J., Rosenau, T., Beaumont, M.: Resource-saving Production of Dialdehyde Cellulose: Optimization of the Process at High-consistency. ChemSusChem, 12, 20, 4679-4684, 21.10.2019, veröffentlicht           

 

Merela, M., Turicnik, V., Oven, P., Vek, V.: Anatomical, chemical and sorption properties of sapwood and heartwood of scots pine. Acta Silvae et Ligni, akzeptiert

 

Mihalic, M., Sobczak, L., Pretschuh, C., Unterweger, Ch.: Increasing the Impact Toughness of Cellulose Fibre Reinforced Polypropylene Composites - Influence of Different Impact Modifiers and Production Scales. Journal of Composites Science, 3, 82, 1 bis 13, 08.08.2019, veröffentlicht

 

Mihalic, M., Soares de Sousa, F., Burzic, I., Hinterreiter, A., Stifter, D., Fürst, Ch.: Morphology and Characterisation of Novolac-LDPE- Based Mixtures as Matrix for Injection Moulded Green Bodies for Bio-Based SiC Ceramics. Ceramics, 2(3), 536-550, 09.09.2019, https://doi.org/10.3390/ceramics2030041, veröffentlicht

 

Mimini, V., Sykacek, E., Hashim, S.N.A.S., Holzweber, J., Hettegger, H., Fackler, K., Potthast, A., Mundigler, N., Rosenau, T.: Compatibility of kraft lignin, organosolv lignin and lignosulfonate with PLA in 3D printing. Journal of Wood Chemistry and Technology, Vol. 39, Issue 1, 14-30, 31.01.2019, veröffentlicht

 

Minimi, V., Hassan, A., Hettegger, H., Bacher, M., Bischof, R.H., Fackler, K., Potthast, A., Rosenau, T.: Lignosulfonate-based polyurethane materials via cyclic carbonates - preparation and characterization. Holzforschung, 01.05.2019, veröffentlicht online

 

Nopens, M., Riegler, M., Hansmann, C., Krause, A.: Simultaneous change of wood mass and dimension caused by moisture dynamics. Scientific Reports, 9:10309, 16.07.2019, veröffentlicht

 

Partl, G.J., Huemer, K., Bischof, R.H., Aigner, D., Sperger, C., Schottenberger, H.: Convenient preparation of methyl cellulose using trimethylsulfonium hydroxide electrolytes. Lenzing Berichte, Vol. 95, 15-22, akzepiert

 

Pernkopf, M., Riegler, M., Gronalt, M.: Profitability gain expectations for computed tomography of sawn logs. European Journal of Wood and Wood Products, 77, 619–631, 24.04.2019, veröffentlicht

 

Ranacher, L., Wallin, I., Homgren, S., Valsta, L. (Guest Editors): Socio-political dimensions of forest-based bioeconomies in Europe: competing perspectives and regional disparities. Ambio – A Journal of the Human Environment, 01.09.2019, veröffentlicht

 

Ranacher, L., Ludvig, A., Schwarzbauer, P.: Depicting the peril and not the potential of forests for a biobased economy? A qualitative content analysis on online news media coverage in German language articles. Forest Policy and Economics, 01.09.2019, veröffentlicht

 

Rehm, K., Jocham, Ch.: Entwurf Pulverbeschichtung von MDF und anderen Holzwerkstoffen. VDI 2015, Blatt 1, 2019-07, VDI-RICHTLINIE, https://www.beuth.de/de/technische-regel-entwurf/vdi-2015-blatt-1/3034385, 18.07.2019, veröffentlicht

 

Rieder-Gradinger, C., Lindemann, M., Milovanovic, A., Forneck, A., Hansmann, C.: Regulation of extractives content within oak wood used for barrique by specific variation of raw material- and process parameter. Wood Research, 64, 3, 30.06.2019, veröffentlicht

 

Riegler, M., Pinkl, S., Schindler, A., Gindl-Altmutter W.: Funktionsorientierte Holzwerkstoffe durch „intelligente“ Additive. Holztechnologie, 60, 3, 10-14, Mai 2019, veröffentlicht

 

Rindler A., Vay, O., Hansmann, C., Konnerth, J.: Adhesive related warping intensity of wooden bi-layers. Wood Science and Technology, 53, 1015-1033, 12.09.2019, veröffentlicht

 

Rindler, A., Hansmann, C., Konnerth, J.: The effect of moisture on the mechanical response of wood, adhesive and their interphase by means of nanoindentation. Wood Science and Technology, 53, 729–746, 15.05.2019, veröffentlicht

 

Rößler, C., Breitenecker, F., Riegler, M.: Simulation in Wood Science: a Novel Model for the Process Gluing. ARGESIM, 56, 253-258, 06.10.2018, veröffentlicht

 

Sarannya, V., Rishwana, S.S., Mahalakshmy, R., Mahendran, A.R., Vijayakumar, R.S.C.T.: Synthesis and thermal studies of bis(isomaleimide)/bisphenol A and ortho novalac blends. Journal of Elstomers & Plastics, https://doi.org/10.1177/0095244319871683, 15.09.2019, veröffentlicht

 

Schäfer, H., Pretschuh, C., Brüggemann, O.: Reduction of cycle times in injection molding of PLA through bio-based nucleating agents. European Polymer Journal, 115, 11.03.2019, veröffentlicht 

 

Schlackl, K., Herchl, R., Samhaber, W.: Nanofiltration of Succinic Acid in Strong Alkaline Conditions. MDPI Membranes, Vol. 9, 08.11.2019, veröffentlicht

 

Simunovic, N., Stern, T.; Hesser, F.: Is sustainable forest management enough? Insights from a frame analysis of European environmental non-governmental organizations. Austrian Journal of Forest Science, 01.01.2019, veröffentlicht

 

Sobczak, L., Jerabek, M., Lummerstorfer, T., Salaberger, D., Renner, K., Haider, A.: Pseudo-ductile behaviour of Poly(vinyl alcohol) fibre reinforced Polypropylene. Composites Part A, 40, 10, 4067-4078, 06.03.2019, veröffentlicht                 

 

Solt, P., Konnerth, J., Gindl-Altmutter, W., Kantner, W., Moser, J., Mitter, R., van Herwijnen, H.W.G.: Technological performance of formaldehyde-free adhesive alternatives for particle board industry. International Journal of Adhesion and Adhesives, DOI: 10.1016/j.ijadhadh.2019.04.007, 99-131, 11. Juni 2019, veröffentlicht

 

Solt, P., van Herwijnen, H.W.G., Konnerth, J.: Thermoplastic and moisture-dependent behavior of lignin phenol formaldehyde resins. Journal of Applied Polymer Science, DOI: 10.1002/app.48011, 14.05.2019, veröffentlicht

 

Süss, R., Leitner, V., Paulik, Ch., Putz, R., Kamm, B.: Quantifizierungsmethoden für die Produktion von PHB mittels Halomonas halophila. Biospektrum, Vol. 25, Issue 2, 226-228, 29.03.2019, veröffentlicht

 

Urdl, K., Weiss, S., Brodbeck, B., Kandelbauer, A., Zikulnig-Rusch, E., Müller, U., Kern, W.: Homogeneous, Monodispersed Furan-Melamine Particles Performing Reversible Binding and Forming Networks. European Polymer Journal, https://doi.org/10.1016/j.eurpolymj.2019.04.006, online: 04.04.2019, veröffentlicht

 

Urdl, K., Weiss, S., Hesser, G., Kandelbauer, A., Zikulnig-Rusch, E., Müller, U., Kern, W.: Data on production and characterization of melamine-furan-formaldehyde particles and reversible reactions thereof. Data in Brief, https://doi.org/10.1016/j.dib.2019.104056, 25.05.2019, veröffentlicht

 

Vardai, R., Lummerstorfer, T., Pretschuh, C., Jerabek M., Gahleitner, M., Pukanszky, B., Renner, K.: Impact modification of PP/wood composites: A new approach using hybrid fibers. Express Polymer Letters, 13 (3) 2019, 223-234, 2019, https://doi.org/10.3144/expresspolymlett.2019.19, veröffentlicht

 

Wang, M., Zhang, H., Hu, Q., Liu, D., Lammer, H.: Research and implementation of a non-supporting 3D printing method based on 5-axis dynamic slice algorithm. Robotics and Computer-Integrated Manufacturing, Volume 57, 496-505, Juni 2019, akzeptiert

 

Weiss, S., Urdl, K., Mayer, H.A., Zikulnig-Rusch, E.M., Kandelbauer, A.: IR Spectroscopy: Suitable Method for Determination of Curing Degree and Crosslinking Type in Melamine-Formaldehyde Resins. Journal of Applied Polymer Science, März 2019, DOI:10.1002/app.47691, akzeptiert

 

Zhang, H., Sun, Z., Hu, Q., Lammer, H.: Research and Implementation of Integrated Methods of Unsupported Printing and Five-Axis CNC Machining Technology. Technical Gazette, Technical Gazette 26, 5(2019), 1267-1274, 01.09.2019, veröffentlicht

 

Zikulnig, J., Hirschl, Ch., Rauter, L., Krivec, M., Lammer, H., Riemelmoser, F., Roshanghias, A.: Inkjet printing and characterisation of a resistive temperature sensor on paper substrate. Flexible and Printed Electronics, Februar 2019, akzeptiert