Fachzeitschriften (reviewed)
2020
Aburaia, M., Bucher, C.M., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H., Lammer, H.: A Production Method for Standardized Continuous Fiber Reinforced FFF Filament. Biomaterials and Medical Applications, https://doi.org/10.37532/bma.2020.4(1).123, 20.05.2020, akzeptiert
Arminger, B., Jaxel, J., Bacher, M., Gindl-Altmutter, W., Hansmann, C.: On the drying behavior of natural oils used for solid wood finishing. Progress in Organic Coatings, 148, 105831, 10.06.2020, veröffentlicht
Aufischer, G., Kamm, B., Paulik, C.: Polycondensation of kraft-Lignin towards value-added biomaterials: carbonaerogels. International Journal of Biobased Plastic, akzeptiert
Barbini, S., Sriranganadane, D., España-Orozco, S., Kabrelian, A., Karlström, K., Rosenau, T., Potthast, A.: Tools for bark biorefineries: Studies towards improved characterization of lipophilic lignocellulosic extractives by combining supercritical fluid and gas chromatography. ACS Sustainable Chemistry & Engineering, akzeptiert
Bauernfeind, C.M., Zimek, M., Lettner, M, Hesser, F., Baumgartner, R.J., Stern, T.: Comparing the incomparable? A review of methodical aspects in the sustainability assessment of wood in vehicles. The International Journal of Life Cycle Assessment, 25, 2217-2240, 14.09.2020, veröffentlicht
Benthien, J., Riegler, M., Engehausen, N., Nopens, M.: Specific Dimensional Change Behavior of Laminated Beech Veneer Lumber (BauBuche) in Terms of Moisture Absorption and Desorption. Fibres, 8, 47, 16.07.2020, veröffentlicht
Bliem, P., Frömel-Frybort, S., van Herwijnen, H.W.G., Mauritz, R., Müller, U., Teischinger, A., Konnerth, J.: Holzwerkstoff basierend auf Partikeln hergestellt mittels einer neuartigen, nicht schneidenden Zerteilungstechnologie. Holztechnologie, 61, 3, 30-38, August 2020, veröffentlicht
Bockel, S., Harling, S., Konnerth, J., Niemz, P., Weiland, G., Hogger, E., Pichelin, F.: Modifying elastic modulus of two-component polyurethane adhesive for structural hardwood bonding. Journal of Wood Science, DOI: 10.1186/s10086-020-01917-9, 66, 29.09.2020, veröffentlicht
Breitenbach, S., Lumetzberger, A., Hobisch, M.A., Unterweger, C., Spirk, S., Stifter, D., Fürst, C., Hassel, A.W.: Supercapacitor Electrodes from Viscose-based Activated Carbon Fibers: Significant Yield and Performance Improvement using Diammonium Hydrogen Phosphate as Impregnating Agent. C - Journal of Carbon Research, https://www.mdpi.com/2311-5629/6/2/17#, 1-12, 27.03.2020, veröffentlicht
Chebaeva, N., Lettner, M., Wenger, J., Schöggl, J.P., Hesser, F., Holzer, D., Stern, T.: Dealing with the eco-design paradox in research and development projects: The concept of sustainability assessment levels. Journal of Cleaner Production, 125232, 23.11.2020, veröffentlicht
Chizzola, R., Müllner, K.: Variability of volatiles in Pinus cembra L. within and between trees from a stand in the Salzburg Alps (Austria) as assessed by essential oil and SPME analysis. Genet. Resources and Crop Evolution, https://doi.org/10.1007/s10722-020-01006-2, 16.09.2020, veröffentlicht
Ekbote, G.S., Khalifa, M., Mahendran, A.R., Anandhan, S.: Cationic Surfactant Assisted Enhancement of Dielectric and Piezoelectric Properties of PVDF nanofibers for Energy Harvesting Application. Soft Matter, 26.12.2020, veröffentlicht
España-Orozco, S., Zeitlinger, P., Fackler, K., Bischof, R.H., Potthast, A.: A solid-phase extraction method that eliminates matrix effects of complex pulp mill effluents for the analysis of lipophilic wood extractives. Nordic Pulp & Paper Research Journal, akzeptiert
Gindl-Altmutter, W., Czabany, I., Unterweger, C., Gierlinger, N., Xiao, N., Bodner, S.C., Keckes, J.: Structure and electrical resistivity of individual carbonised natural and man-made cellulose fibres. Journal of Materials Science, https://link.springer.com/content/pdf/10.1007%2Fs10853-020-04743-y.pdf, 55, 10271-10280, 12.05.2020, veröffentlicht
Goto, T., Zaccaron, S., Bacher, M., Hettegger, H., Potthast, A., Rosenau, T.: On nitrogen fixation and “residual nitrogen content” in cellulosic pulps. Carbohydrate Polymers, 253, 117235, 01.02.2021, veröffentlicht online
Herzele, S., van Herwijnen H.W.G., Griesser, T., Gindl-Altmutter, W., Rößler, C., Konnerth, J.: Differences in adhesion between 1C-PUR and MUF wood adhesives to (ligno) cellulosic surfaces revealed by nanoindentation. International Journal of Adhesion and Adhesives, 98, 102507, Jänner 2020, veröffentlicht
Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Einfluss der Kaltklebrigkeit auf die Vernetzung von Harnstoff-Formakdehyd Harzen. Holztechnologie, 61, 3, 43-48, August 2020, veröffentlicht
Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Systematic assessment of wheat extenders in formaldehyde-condenstation plywood resins: Part I - physico-chemical adhesive properties. The Journal of Adhesion, DOI: 10.1080/00218464.2020.1776123, 14.06.2020, veröffentlicht
Hogger, E.M., van Herwijnen, H.W.G., Moser, J., Kantner, W., Konnerth, J.: Systematic assessment of wheat extenders in formaldehyde-condenstation plywood resins: Part II - mechanical properties of plywood panels. The Journal of Adhesion, https://doi.org/10.1080/00218464.2020.1756788, 30.04.2020, veröffentlicht
Janakiraman, S., Khalifa, M., Biswal, R., Ghosh, S., Anandhan, S., Venimadhav, A.: High Performance electrospn nanofiber coated polypropylene membrane as a separator for sodium ion batteries. Journal of Power Sources, 460, 2020, 228060, 15.03.2020, akzeptiert
Janesch, J., Arminger, B., Gindl-Altmutter, W., Hansmann, C.: Superhydrophobic coatings on wood made of plant oil and natural wax. Progress in Organic Coatings, 148, 105891, November 2020, veröffentlicht
Janesch, J., Czabany, I., Hansmann, C., Mautner, A., Rosenau, T., Gindl-Altmutter, W.: Transparent layer-by-layer coatings based on biopolymers and CeO2 to protect wood from UV light. Progress in Organic Coatings, 138, 105409, Jänner 2020, veröffentlicht
Janesch, J., Jones, M., Bacher, M., Kontturi, E., Bismarck, A., Mautner, A.: Mushroom-derived chitosan-glucan nanopaper filters for the treatment of water. Reactive and Functional Polymers, 146, 104428, Jänner 2020, veröffentlicht
Jaxel, J., Guggenberger, M., Rosenau, T., Böhmdorfer, S.: Unbreakable and customizable dipping chambers for TLC and HPTLC manufactured by fused deposition modelling. Talanta, https://doi.org/10.1016/j.talanta.2020.121072, 21.04.2020, veröffentlicht
Jaxel, J., Liebner, F., Hansmann, C.: Solvent-Free Dyeing of Solid Wood in Water-Saturated Supercritical Carbon Dioxide. ACS Sustainable Chemistry and Engineering, 8, 5446-5451, 30.03.2020, veröffentlicht
Kain S., Ecker J.V., Haider A., Musso M., Petutschnigg A.: Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites. European Journal of Wood and Wood Products, https://doi.org/10.1007/s00107-019-01473-0, 78 (2), 65-74, 01.01.2020, veröffentlicht
Khalifa, M., Anandhan, S.: PVDF Nanofibers with embedded polyanyiline- Graphitic Carbon Nitride Nanosheet Composites for Piezolectric energy Conversion. Applied Nano Materials, 16.10.2019, akzeptiert
Khalifa, M., Anandhan, S., Wuzella, G., Lammer, H., Mahendran, A.R.: Thermoplastic Polyurethane Composites Reinforced with Renewable and Sustainable Fillers-A Review. Polymer-Plastics Technology and Engineering, https://doi.org/10.1080/25740881.2020.1768544, 04.06.2020, veröffentlicht
Khalifa, M., Ekbote, G., Anandhan, S., Wuzella, G., Lammer, H., Mahendran, A.R.: Physico-chemical Characteristics of Bio-Based Thermoplastic Polyurethane/ Graphene Nanocomposite for Piezo-resistive Strain Sensor. Journal of Applied Polymer Science, https://doi.org/10.1002/app.49364, 02.05.2020, akzeptiert
Khalifa,M., Wuzella, G., Lammer, H., Mahendran, A.R.: Smart Paper from Graphene Coated Cellulose for High-Performance Humidity and Piezoresistive Force Sensor. Synthetic Metals, 266, 01.08.2020, veröffentlicht
Leßlhumer, J., Reif, M., Haider, A.: Comprehensive characterization of WPC materials. Holztechnologie, Oktober 2020, veröffentlicht
Lettner, M., Hesser, F., Hedeler, B., Schwarzbauer, P., Stern, T.: Barriers and incentives for the use of lignin-based resins: Results of a comparative importance performance analysis. Journal of Cleaner Production, 256, 120520, 01.02.2020, veröffentlicht
Lindemann, M., Widhalm, B., Kuncinger, T., Srebotnik, E.: An integrated process for combined microbial VOC reduction and effluentvalorization in the wood proucessing industry. Bioresource Technology Reports, https://doi.org/10.1016/j.biteb.2020.100471, 06.06.2020, veröffentlicht
Lucia, A., Bacher, M., van Herwijnen, H.G.W., Rosenau, T.: A Direct Silanization Protocol for Dialdehyde Cellulose. Molecules, 25, 2458, 25.05.2020, veröffentlicht
Lucia, A., van Herwijnen, H.W.G., Kantner, W., Rosenau, T.: Wood-based resins and other bio-based binders for the production of mineral wool: a mini-review. Holzforschung, https://doi.org/10.1515/hf-2019-0280, 28.02.2020, veröffentlicht
Masiero, M., Secco, L., Pettenella, D., Da Re, R., Bernö, H., Carreira, A., Dobrovolsky, A., Giertlieova, B.: Bioeconomy perception by future stakeholders: Hearing from European forestry students. AMBIO - A Human Environment Journal, 49, 1925-1942, 13.10.2020, veröffentlicht
Milakin, K.A., Gavrilov, N., Pašti, I.A., Morávková, Z., Acharya, U., Unterweger, C., Breitenbach, S., Zhigunov, A., Bober, P.: Polyaniline-metal organic framework (Fe-BTC) composite for electrochemical applications. Polymer, 208, 122945, 25.08.2020, veröffentlicht
Milakin, K.A., Trchová, M., Acharya, U., Breitenbach, S., Unterweger, C., Hodan, J., Hromádková, J., Pfleger, J., Stejskal, J., Bober, P.: Effect of initial freezing temperature and comonomers concentration on the properties of poly(aniline-co-m-phenylenediamine) cryogels. Colloid and Polymer Science, https://doi.org/10.1007/s00396-020-04608-5, 08.02.2020, veröffentlicht
Minisy, I.M., Acharya, U., Unterweger, C., Breitenbach, S., Zhigunov, A., Bober, P., Kobera, L., Trchová, M., Brus, J., Pfleger, J., Stejskal, J.: Highly conducting 1-D polypyrrole prepared in the presence of safranin. Journal of Materials Chemistry C, 8, 12140-12147, 24.07.2020, veröffentlicht
Perić, M., Putz, R., Paulik, C.: 3D-Printed PLA Filaments Reinforced with Nanofibrillated Cellulose. Journal of Renewable Materials, Vol. 8, 7, 759-772, 01.06.2020, veröffentlicht
Pinkl, S., van Herwijnen, H.W.G., Veigel, S., Gindl-Altmutter, W., Riegler, M.: Effects of fibrillar cellulosic additives on particleboard production and properties. Wood Material Science & Engineering, https://doi.org/10.1080/17480272.2020.1786722, 02.07.2020, veröffentlicht
Policardi, F., Thebault, M.: The Buffer Effect of Different Wood Species and the Influence of Oak on Panel Composites Binders. Polymers, https://doi.org/10.3390/polym12071540, 12.07.2020, veröffentlicht
Ranacher, L., Pollakova, A., Liebal, S., Weber, N., Schwarzbauer, P., Hesser, F.: Farmers’ willingness to adopt short rotation plantations on marginal lands: qualitative study about incentives and barriers in Slovakia. BioEnergy Research, akzeptiert
Ranacher, L., Sedmik, A., Schwarzbauer, P.: Public perceptions of forestry and the forest-based bioeconomy in the European Union. Knowledge to Action 3, European Forest Institute, 27.10.2020, veröffentlicht
Ranacher, L., Wallin, I., Valsta, L., Kleinschmit, D.: Social dimensions of the forest-based bioeconomy. AMBIO - A Human Environment Journal, 49, 1851-1859, 13.10.2020, veröffentlicht
Rößler, C., Breitenecker, F., Riegler, M.: Simulating the Gluing ofWood Particles by Lattice Gas Cellular Automata and Random Walk. Mathematics, 8, 988, 16.06.2020, veröffentlicht
Sarosi, O.P., Bischof, R.H., Potthast, A.: Tailoring Pulp Cellulose with Electron Beam Irradiation: Effects of Lignin and Hemicellulose. ACS Sustainable Chem. Eng., 7235–7243, 14.04.2020, veröffentlicht
Savandaiah, C., Maurer, J., Gall, M., Haider, A., Steinbichler, G., Sapkota, J.: Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/Carbon fiber composites fabricated by material extrusion additive manufacturing. Applied Polymer Science, https://doi.org/10.1002/app.50243, 25.10.2020, veröffentlicht
Schlackl, K., Bischof, R.H., Fackler, K., Samhaber, W.: Impact of intermolecular interactions on the nanofiltration of pulping liquor. Separation and Purification Technology, 29.05.2020, veröffentlicht online
Schlackl, K., Bischof, R.H., Samhaber, W.: Negative retention by the nanofiltration of aqueous biomass hydrolysates derived from wood pulping. Separation and Purification Technology, Vol. 242, 28.02.2020, veröffentlicht
Seidl, R., Weiss, S., Zikulnig-Rusch, E.M., Kandelbauer, A.: Response Surface Optimization for improving the processing behaviour of melamine formaldehyde impregnation resins. Journal of Applied Polymer Science, https://doi.org/10.1002/app.50181, 27.10.2020, veröffentlicht
Shamitha, C., Mahendran, A.R., Anandhan, S.: Effect of polarization switching on piezoelectric and dielectric performance of electrospun nanofabrics of poly(vinylidene fluoride)/Ca-Al LDH nanocomposite. Journal of Applied Polymer Science, Vol. 137, Issue20, 08.11.2019, akzeptiert
Shetty,S., Ekbote, G.S., Mahendran, A.R., Anandhan, S.: Polymorphism, dielectric and piezoelectric response of organo-modified Ni–Co layered double hydroxide nanosheets dispersed electrospun PVDF nanofabrics. Journal of Materials Science: Materials in Electronics, Vol. 30, 20703-20715, 05.09.2019, akzeptiert
Shetty,S., Mahendran, A.R., Anandhan, S.: Development of a new flexible nanogenerator from electrospun nanofabric based on PVDF/talc nanosheet composites. Soft Matter, https://doi.org/10.1039/D0SM00341G, Mai 2020, veröffentlicht
Singh, R., Janakiraman, S., Khalifa, M., Anandhan, S., Ghosh, S., Venimadhav, A., Biswas, K.: A high thermally stable polyacrylonitrile (PAN)-based gel polymer electrolyte for rechargeable Mg-ion battery. Journal of Materials Science: Materials in Electronics, Vol. 31, 22912 - 22925, veröffentlicht
Singh, R., Janakiraman, S., Khalifa, M., Anandhan, S., Ghosh, S., Vanimadhev, A., Biswas, K.: An electolyte ß-Phase polyvinylidene fluoride as gel poylmer electrolyte for magenesium -ion battery application. Journal of Electroanalytical Chemistry, https://doi.org/10.1016/j.jelechem.2019.113417, 10.10.2019, akzeptiert
Solt, P., Libowitzky, S., van Herwijnen, H.W.G., Konnerth, J.: Improved method for analyzing cohesive strength development of pMDI. Wood Science and Technology, 54, 7-17, Jänner 2020, veröffentlicht
Stern, T., Wenger, J., Asada, R., Mair-Bauernfeind, C., Haas, V., Popowicz, M., Ranacher, L., Hesser, F., Kriechbaum, M.: Bioökonomie im waldbasierten Sektor: inkrementeller oder disruptiver Wandel? Schweizerische Zeitschrift für Forstwesen (SZF), 172 (1), 16-24, 01.01.2021, veröffentlicht
Stockinger, T., Liedl, B., Steiner, M., Schwödiauer, R., Padinger, F., Bauer, S., Kaltenbrunner, M., Müller, U.: Printed sensors on paper and wood - The frugal way of in-line detection to characterize the crosslinking behaviour of water-based glues. Sensors and Actuators B: Chemical, https://doi.org/10.1016/j.snb.2020.128750, 01.12.2020, veröffentlicht
Süss, R., Kamm, B., Arnezeder, D., Zeilerbauer, L., Paulik, C.: Homogenously catalyzed depolymerization of lignin from arganosolv medium: charakterization, optimazion and minimazion of coke formation. The Canadien Journal of Chemical Engineering, akzeptiert
Thébault, M., Kutuzova, L., Jury, S., Eicher, I., Zikulnig-Rusch, E.M., Kandelbauer, A.: Effect of phenolation, Lignin-type and degree of substitution on the wetting behavior, rheological properties and thermal curing profiles of Lignin-modified phenol-formaldehyde impregnation resins. Journal of Renewable Materials, https://doi.org/10.32604/jrm.2020.09616, 24.03.2020, veröffentlicht
Thébault, M., Li, Y., Beuc, C., Frömel-Frybort, S., Zikulnig-Rusch, E.M., Kutuzova, L., Kandelbauer, A.: Impregnated paper-based decorative laminates prepared from lignin-substituted phenolic resins. Journal of Renewable Materials, DOI: 10.32604/jrm.2020.09755, August 2020, akzeptiert
Thoma, C., Konnerth, J., Sailer-Kronlacher, W., Rosenau, T., Potthast, A., van Herwijnen, H.W.G.: Hydroxymethylfurfural and its derivates: Potential as key reactant in adhesives. ChemSusChem, 13, 20, 5408-5422, 05.08.2020, veröffentlicht
Thoma, C., Konnerth, J., Sailer-Kronlacher, W., Solt-Rindler, P., Rosenau, T., van Herwijnen, H.W.G.: Current situation of the challenging scale-up development of hydroxymethylfurfural production. ChemSusChem, 13, 14, 3544-3564, 17.04.2020, veröffentlicht
Unterweger, C., Mayrhofer, T., Piana F., Duchoslav, J., Stifter, D., Fürst, C.: Impact of fiber length and fiber content on the mechanical properties and electrical conductivity of short carbon fiber reinforced polypropylene composites. Composites Science and Technology. https://doi.org/10.1016/j.compscitech.2020.107998, 1-8, 09.01.2020, veröffentlicht
Urdl, K., Christöfl, P., Weiss, S., Kandelbauer, A., Müller, U., Kern, W.: Thermomechanical and microhardness data of melamine-formaldehyde-based self-healing resin film able to undergo reversible crosslinking via Diels-Alder reaction. European Polymer Journal, https://doi.org/10.1016/j.dib.2020.106559, 16.11.2020, veröffentlicht
Urdl, K., Weiss, S., Christöfl, P., Kandelbauer, A., Müller, U., Kern, W.: Diels-Alder modified self-healing melamine resin. European Polymer Journal, https://doi.org/10.1016/j.eurpolymj.2020.109601, 06.03.2020, veröffentlicht
Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukanszky, B.: Comparative study of fiber reinforced PP composites: effect of fiber type, coupling and failure mechanisms. Composites Part A, Applied Science and Manufacturing, https://doi.org/10.1016/j.compositesa.2020.105895, Vol. 133, Juni 2020, veröffentlicht
Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukanszky, B.: Reinforcement of PP with Polymer Fibers: Effect of Matrix Characteristics, Fiber Type and Interfacial Adhesion. Polymer, https://doi.org/10.1016/j.polymer.2020.122203, 24.01.2020, veröffentlicht
Várdai, R., Milán, F., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukánszky, B.: Effect of Various Organic Fibers on the Stiffness, Strength and Impact Resistance of Polypropylene. Polymer International, http://dx.doi.org/10.1002/pi.6105, 08.09.2020, veröffentlicht
Weiss, R., Eischer, A., Tadic, T., Ortner, M., Prallc, K., Neunteufel, E., Putz, R., Guebitz, G.M., Nyanhongo, G.S.: Valorisation of slaughter house and deinking paper waste streams for the production of enzyme by Trichoderma reesei. Journal of Cleaner Production, Vol. 275, 01.12.2020, veröffentlicht
Weiss, S., Seidl, R., Kessler, W., Kessler, R., Zikulnig-Rusch, E.M., Kandelbauer, A.: Unravelling the Phases of Mealmine Formaldehyde Resin Cure by Infrared Spectroscopy (FTIR) and Multivariate Cure Resolutin (MCR). Polymers, https://doi.org/10.3390/polym12112569, 02.11.2020, veröffentlicht
Wuzella, G., Mahendran, A.R., Beuc, C., Lammer, H.: Isoconversional cure kinetics of a novel thermosetting resin based on linseed oil. Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-020-09529-7, 18.03.2020, veröffentlicht
Wuzella, G., Mahendran, A.R., Kandelbauer, A.: Green composite material made from Typha latifolia fibres bonded with an epoxidized linseed oil / tall oil-based polyamide binder system. Journal of Renewable Materials, Vol. 8, No. 5, 2020, 499-512, 29.04.2020, veröffentlicht
Yao, Y., Li, M., Lackner, M., Lammer, H.: A continuous fiber-reinforced additive manufacturing processing based on PET fiber and PLA. Additive Manufacturing Materials and Their Applications, akzeptiert
Zhang, H., Liu, D., Huang, T., Hu, Q., Lammer, H.: Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine. Materials, 13, 1678, 15.04.2020, akzeptiert
Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J., Lammer, H.: Research and implementation of axial 3D printing method for PLA pipes. Materials, akzeptiert