Reviewed Scientific Journals



Alkin, K., Stockinger, T., Zirkl, M., Stadlober, B., Bauer­Gogonea, S., Kaltenbrunner, M., Bauer, S., Müller, U., Schwödiauer, R.: Paper-based  printed impedance sensors for  water sorption and humidity analysis. Flexible and Printed Electronics,­8585/ aa5eeb, erschienen


Colson, J., Kovalcik, A., Kucharczyk, P., Gindl­Altmutter, W.: Reinforcement of Poly (Lactic Acid) with Lignocellulose Powder. BioResources, 12, 1112–1127, erschienen


Ettwein, F., Rohrer­Vanzo, V., Langthaler, G., Werner, A., Stern, T., Moser, O., Leitner, R., Regenfelder, K.: Consumer’s perception of high gloss furniture: instrumental gloss measurement versus visual gloss evaluation. European Journal of Wood and Wood Products, DOI: 10.1007/s00107­017­1197­4, erschienen


Ghorbani, M., Konnerth, J., Budjav, E., Requejo Silva, A., Zinovyev, G., van Herwijnen, H.W.G., Edler, M., Griesser, T., Liebner, F.: Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins. Polymers, 9, 2, doi: 10.3390/polym9020043, erschienen


Ghorbani, M., Konnerth, J., van Herwijnen, H.W.G., Zinovyev, G., Budjav, E., Requejo Silva, A., Liebner, F.: Commercial lignosulfonates from different sulfite processes as partial phenol replacement in PF resole resins. Journal of Applied Polymer Science, akzeptiert


Ghorbani, M., Liebner, F., Solt, P., van Herwijnen, H.W.G., Konnerth, J.: Ligneous resole adhesives for exterior-grade plywood. European Journal of Wood and Wood Products, akzeptiert


Ghorbani, M., Liebner, F., van Herwijnen, H.W.G., Konnerth, J.: Paper-  based laminates produced with kraft lignin-rich phenol-formaldehyde resoles meet requirements of outdoor usage. European Journal of Wood and Wood Products, akzeptiert


Holcapkova, P., Stloukal, P., Kucharczyk, P., Omastova, M., Kovalcik, A.: Anti-hydrolysis effect of aromatic carbodiimide in poly(lactic acid)/wood flour composites. Compo sites Part A.,, erschienen


Huber, D., Huber, J., Hesser, F., Höllbacher, E., Stern, T.: Two experts, three opinions: Volatile organic compounds‘ testing methods and regulative systems. European Journal of Wood and Wood Products, 76, 05. Dez 2017, erschienen


Huber, J., Ranacher, L., Stern, T., Schwarzbauer, P.: Forest management or greed of gain? – An information experiment on peri-urban forest visitors’ attitudes regarding harvesting operations. Urban Forestry and Urban Greening, 27, 214–220, erschienen


Hutterer, C., Fackler, K., Potthast, A.: The Fate of 4-O-Methyl Glucuronic Acid in Hardwood Xylan during Alkaline Extraction. ACS Sustainable Chem. Eng. 5, 1818–1823, erschienen


Hutterer, C., Kliba, G., Fackler, K., Böhmdorfer, S., Potthast, A.: Hyphenated size exclusion chromatography to study residual lignin in alkali extracted xylans from paper pulps. Current Chromatography,  4, E­pub ahead of print, erschienen


Hutterer, C., Kliba, G., Punz, M., Fackler, K., Potthast, A.: Enzymatic pulp upgrade for producing high-value cellulose out of a Kraft paper pulp Enzyme and Microbial Technology. Enzyme and Microbial Technology,102, 67–73, erschienen


Hutterer, C., Fackler, K., Schild, G., Ibl, V., Potthast, A.: Xylan Localization on Pulp and Viscose Fibre Surfaces., 5632–5648, erschienen


Khalifa, M., Mahendran, A.,  Anandhan, S.: Probing the Synergism of Halloysite Nanotubes and Electrospinning on Crystallinity, Polymorphism and Piezoelectric Performance of Poly(vinylidene fluoride). RSC Advances, 115, 113820 to 114968, DOI: 10.1039/ C6RA20599B, erschienen

Kluge, M., Veigel, S., Pinkl, S., Henniges, U., Zollfrank, C., Rössler, A., Gindl­Altmutter, W.: Nanocellulosic fillers for waterborne wood coatings: reinforcement effect on free-standing coating films. Wood Science and Technology, DOI: 10.1007/s00226­017­0892­y, erschienen

Kovalcik, A., Meicner, K., Mihalic, M., Zeilinger, W., Fritz, I., Fuchs, W., Kucharczyk, P., Stelzer, F., Drosg, B.: Characterisation of polyhydroxyalkanoates produced by Synechocystis salina from digestate supernatant. International Journal of Biological Macromolecules, 102, 497–504, erschienen


Kölbl, S., Leßlhumer, J., Haider, A., Brüggemann, O., Buchberger, W.: Oxidations-Induktionszeit (OIT) – das passende Qualitätskriterium für WPC-Terrassendielen? Holztechnologie, 58, 38–45, erschienen


Krenke, T., Frybort, S., Müller, Ul.: Cutting force analysis of a  linear cutting process of spruce. Wood Material
Science and Engineering, DOI: 10.1080/17480272.2017.1324916, erschienen


Lähtinen, K., Toppinen, A., Suojanen, H., Stern, T., Ranacher, L., Burnard, M., Kitek Kuzman, M.: Forest sector sustainability communication in Europe: A systematic review on the contents and gaps. Journal of Current Forestry Reports, 3 (3), 173–187, erschienen


Lettner, M., Schöggl, J.­P., Stern, T.:  Factors influencing the market diffusion of biobased plastics: Results of four comparative scenario analyses. Journal of Cleaner Production, 157, 289–298, erschienen


Lindemann, M., Friedl, A., Srebotnik, E.: Enhanced cellulose degradation of wheat straw during aqueous ethanol organosolv treatment. Bioresources, DOI: 10.5376/biores.12.4.9407­9419, erschienen


Lovaglio, T., Meints, T., Gindl­ Altmutter, W., Todaro, L.: Formation of Hydrophobic Wood Surface by Means of Thermal Treatment in Combination with Surface Modification Using Alkyl Ketene Dimer (AKD). Coatings, akzeptiert


Luger, H.J., Köpplmayr, T., Sobczak,  L., Haider, A., Miethlinger, J.: Elongational Rheology of Glass- fibre and Natural-fibre-reinforced Polypropylenes with a Novel Online Rheometer AIP Proceedings zur PPS32. Lyon, akzeptiert


Mahendran, A., Wuzella, G., Pichler, S., Lammer, H., Gindl­Altmutter, W.: Properties of different chemically treated woven hemp fabric reinforced bio-composites. Journal of Renewable Materials, erschienen


Mahler, N., Tschirren, S., Pflügl, S., Herwig, C.: Optimized bioreactor setup for scale-up studies of extreme halophilic cultures. Engine ering Journal, 130, 39–46, erschienen


Mahrdt, E., Hogger, E. M., van Herwijnen, H.W.G., Giesswein, J., Mitter, R., Kantner, W., Moser, J., Gindl­Altmutter, W.: Mikroskopische Klebstoffdetektion in industriellen Oriented Strand Boards. Holztechnologie, 59, 1, 47–51, erschienen


Mahrdt, E., van Herwijnen, H.W.G., Kantner, W., Moser, J., Giesswein, J., Mitter, R., Gindl­Altmutter, W.: Adhesive distribution related to mechanical performance of high density wood fibre board. International Journal of Adhesion and Adhesives, 78, 23–27, erschienen


Martínez­Conde, A., Huber, D., Pinkl, S., Mahrdt, E., Teischinger, A., Müller, Ul.: Dynamic Compression: A Novel Technique to Reduce Energy Consumption during Wood Fibre Production. Bioresources, 12, 4, 7376–7394, erschienen


Martinez­Conde, A., Krenke, T., Frybort, S., Teischinger, A., Müller, Ul.: Review: CO2 Laser cutting of cellulosic materials in comparison with conventional sawing. Wood Science and Technology, DOI 10.1007/s00226­017­0914­9, erschienen


Müller, U., Pretschuh, C., Mitter, R., Knappe, S.: Dielectric Analysis as a cure monitoring system for UF particle boards. International Journal of Adhesion and Adhesives, 73, 45–50, erschienen


Pichler, S., Wuzella, G., Hardt­ Stremayr, T., Mahendran, A., Lammer, H.: High-performance natural fibre composites made from technical flax textiles and manufactured by resin transfer molding Key Engineering Materials. 742, 263–270, DOI: 10.4028/, erschienen


Pinkl, S., Veigel, S., Colson, J., Gindl­Altmutter, W.: Nanopaper properties and adhesive performance of microfibrillated cellulose from different (ligno-) cellulosic raw materials. Polymers, 9, 8, 326, erschienen


Ranacher, L., Lähtinen, K.,  Järvinen, E., Toppinen, A.: Perceptions of the general public on forest sector responsibility: A survey related to ecoystem services and forest sector business impacts in four European countries. Forest Policy and Economics, 78, 180–189,  erschienen

Ranacher L., Stern T., Schwarzbauer P.: Do wood products protect the climate? Public perception of the forestbased sector’s contribution to climate change mitigation. Austrian Journal of Forest Science, 134, 281–298, erschienen


Rindler, A., Vay, O., Hansmann, C., Müller, U.: Dimensional stability of multi-layered wood based panels –  
A review.
Wood Science and Technology, DOI: 10.1007/s00226­0170940­7, erschienen


Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch­ Fauster, K., Mahendran, A., Wuzella, G.: High Performance Green Composites for Green Technologies. Key Engineering Materials, 742, 271­277, DOI: 10.4028/ KEM.742.271, erschienen


Schönicke, P., Kamm, B., Padrock, M.: Stoffliche Nutzung von Biogasabfällen. Biospektrum, 23, 597, erschienen


Schwarzbauer, P., Braun, M.: Auswirkungen von Nutzungsrestriktionen auf die Wertschöpfungskette Holz – Beispiel Österreich. Schweizerische Zeitschrift für Forstwesen, 168, 41–48, erschienen


Siegmund, B., Urdl, K., Jurek, A., Leitner, E.: „More than Honey“: Investigations on Volatiles from Monovarietal Honeys Using New Analytical and Sensory Approaches. Journal of Agriculture and Food Chemistry, DOI: 10.1021/acs. jafc.6b05009, erschienen


Silbermann, S., Weilach, C., Kliba, G., Fackler, K., Potthast, A.: Improving molar mass analysis of cellulose samples with limited solubility. Carbohydrate Polymers, 178, 302–310, erschienen


Steidl, E., Pretschuh, C., Sobczak, L.: Monitoring of injection moulding tool corrosion and effects of WPC compound moisture on the material properties. International Polymer Processing, akzeptiert


Stejskal, J., Bober, P., Hodan, J., Trchova, M., Kovalcik, A., Hromadkova, J., Prokes, J.: Polyaniline Cryogels: Soft and Conducting. Macromolecules, 50, 972–978, erschienen


Thébault, M., Kandelbauer, A., Müller, U., Zikulnig­Rusch, E., Lammer, H.: Factors Influencing the Processing and Technological Properties of Laminates based on Phenolic Resin Impregnated Papers. European Journal of Wood and Wood Products, 75, 5, 785­806, DOI: 10.1007/s00107­017­1205­8, erschienen


Thébault, M., Kandelbauer, A., Müller, U., Zikulnig­Rusch, E.,  Lammer, H.: Review on Impregnation Issues in Laminates Manufacture: Opportunities and Risks of Phenol Substitution by Lignins or other Natural Phenols in Resins. European Journal of Wood and Wood Products, 24 pages, doi. org/10.1007/s00107­017­1206­7, erschienen


Veigel, S., Lems, E.­M., Grüll, G., Hansmann, C., Rosenau, T., Zimmermann, T., Gindl­Altmutter, W.: Simple green route to performance improvement of fully biobased linseed oil coating using nano- fibrillated cellulose. Polymers, 9, 425, erschienen

Weiss, S., Neu, PM., Ludwig, C., Schober, S., Mittelbach, M.: Novel Method for the Synthesis of Cholesteryl Glucosides starting from Disaccharides. European Journal of Lipid Science and Technology, erschienen

Widhalm, B., Rieder­Gradinger, C., Kuncinger, T., Srebotnik, E.: Biodegradation of terpenes for emission-reduced Oriented Strand Boards (OSB). Holzforschung, 71, 3, 259–264, erschienen

Wollboldt, P., Strach, M., Russler, A., Jankova, S., Sixta, H.: Upgrading of commercial pulps to high-purity dissolving pulps by an ionic liquid-based extraction method. Holzforschung, 71, 6543­680, erschienen

Yan, Y., Wang, K., Wang, Z., Gindl­Altmutter, W., Zhang, S., Li, J.: Fabrication of homogeneous and enhanced soybean protein isolate-based composite films via incorporating TEMPO oxidized nano-fibrillated cellulose stablized nano-ZnO hybrid. Cellulose, DOI 10.1007/s10570­017­1469­5, erschienen