Publikationen

Alabi, J.A., Nazari, N., Ampong, D.N., Agyemang, F.O., Adom-Asamoah, M., Opoku, R., Zahrhuber, R., Unterweger, Ch., Mensah-Darkwa, K.: Synthesis of physically activated carbons from Vitellaria paradoxa shells for supercapacitor electrode applications. Inorganics, https://doi.org/10.1039/D5GC01810B, 16.07.2025, veröffentlicht

Barth, A., Ranacher, L.M, Hesser, F., Stern T., Schuster, K.C.: Bridging business and biodiversity: an analysis of biodiversity assessment tools. Environmental and Sustainability Indicators, 26, 100682, 01.03.2025, veröffentlicht

Bartuska, B., Teischinger, A., Riegler, M.: Smart assembly of prefabricated building elements with augmented reality and sensor-based real-time quality control. Wood Materials Science and Engineering, https://doi.org/10.1080/17480272.2025.2527184, 09.07.2025, veröffentlicht

Bhat, A.M., Radu, T., Martín-Fabiani, I., Kolokathis, P.D., Papadiamantis, A.G., Wagner, St., Kohl, Y., Witters, H., Gebbink, W.A., Rodriguez, Y.P., Cardelini, G., Degens, R., Burzic, I., Alfaro Serrano, B., Pretschuh, C., Santamaría-Aranda, E., Contreras-García, E., Sinic, J., Jocham, Ch., Cohen, D., Maor,Z., Assis, A., Panák, O., Novak, U., Hans, S., Biesemeier, A., Camilleri, P., Pérez Sánchez, F., Arblaster, T., Thonemann, N., Guinée, J., Pipino, A., Çelen, O., Alwe, H., Drexel, R., Welz, R., Meier, F., Piragyte-Langa I.O., Tagorti, G., Hardy, B., Velimirovic, M.: Safe and sustainable by design of next generation chemicals and materials: SSbD4CheM project innovations in the textiles, cosmetic and automotive sectors. Computational and Structural Biotechnology Journal, https://doi.org/10.1016/j.csbj.2025.03.022, 17.03.2025, veröffentlicht

Billich, E., Hogger, E., Sumerskii, I., Sailer-Kronlachner, W., Rosenfeld, C., Duller, M., Blum, Ch., Potthast, A., van Herwijnen, H.W.G.: Wettability of Kraft paper with Bio-based Impregnation Resins for the Production of High-pressure Laminates. ACS Omega, veröffentlicht

Billich, E., Sailer-Kronlachner, W., Rosenfeld, C., Hogger, E., Amsüss, A., Potthast, A., aan Herwijnen, H.W.G.: Preparation of High-Pressure Laminates with Bio-Based Fructose-HMF-Amine Impregnation Resin. Journal of Applied Polymer Science, https://doi.org/10.1002/app.70225, 22.12.2025, veröffentlicht

Bliem, P., Rosenfeld, C., Grabner, M., Jeitler, G., Klambauer, J., Chvatal, K., Konnerth, J., van Herwijnen, H.W.G.: Near-infrared spectroscopy for near surface moisture detection in solid-wood lamellae. Wood Materials Science and Engineering, https://doi.org/10.1080/17480272.2025.2584274, 10.10.2025, veröffentlicht

Bliem, P., Zinovyev, G., van Herwijnen, H.W.G.: High performance lignin phenol formaldehyde resins synthesised with hardwood lignin from Continuous Batch Cooking CBC process. Journal of Adhesion, https://doi.org/10.1080/00218464.2025.2502093, 09.05.2025, veröffentlicht

Buchmaier, J., Plesch, T., Petermeier, P., Egermeier, M., Muster, B.: In-line Product Separation in a Continuous Oscillatory Flow Bioreactor as Process Intensification and Product Inhibition Mitigation Strategy. Cleaner Chemical Engineering, https://www.sciencedirect.com/science/article/pii/S2772782325000464, 09.07.2025, veröffentlicht

Duller, M., Mahendran, A.R., Zikulnig-Rusch, E.M.: Advancing bio-based laminates: characterization of sorbitol-modified glyoxal-melamine thermoset resins for eco-conscious decor applications. Journal of Adhesion Science and Technology, https://doi.org/10.1080/01694243.2025.2532785, 26.07.2025, veröffentlicht

España Orozco, S., Hoheneder, R., Steiner, K., Frécaut, S., Fitz, E., Bischof, R.H.: Coagulation temperature during cellulose regeneration from N-methylmorpholine-N-oxide (NMMO) influences the structure and ease of saccharification of lyocell byproducts. Carbohydrate Polymers, https://doi.org/10.1016/j.carbpol.2025.123618, 25.04.2025, veröffentlicht

Fasalek, A., Konnerth, J., van Herwijnen, H.W.G., Stroobants, J., Pramreiter, M.: Method for evaluating the cohesive  strength development of pMDI adhesive using ABES device. Wood Science and Technology, https://doi.org/10.1007/s00226-025-01670-6, 09.06.2025, veröffentlicht

Fasalek, A., Malzl, L., Konnerth, J., van Herwijnen, H.W.G., Stroobants, J., Moser, J., Kantner, W., Gabler, C., Pramreiter, M.: Evaluation of bondability of different wood species using adhesives for wood-based panels. International Journal of Adhesion and Adhesives, https://doi.org/10.1016/j.ijadhadh.2025.104230, 25.11.2025, veröffentlicht

García-Jácome, S.P., Brudermann, A., Stern, T.: Factors affecting the forest value chain resilience–a local economic perspective in five European countries. Frontiers in Forests and Global Change, 8, 17.11.2025, veröffentlicht

Gupta, N., Mahendran, A.R.: Low-cost, ultra-thin paper-based sensors for sensing thermoset composite cure via impedance spectroscopy. Sensing Technology, 10.1080/28361466.2025.2480634, 12.03.2025, veröffentlicht

Gupta, N., Neelisetty, S.S.B., Pragya, L., Mahendran, A.R.: Multi-Sensing Functional Polymers: A Review on Humidity, Strain, Temperature, and Smart Packaging Applications. Monatshefte für Chemie – Chemical Monthly, veröffentlicht

Gupta, N., Wuzella, G., Mahendran, A.R., Kaltenbrunner, M.: Real-Time Cure Monitoring of Bio-based Resin Composites Reinforced with Natural and Glass Fibers. Polymer, 10.1016/j.polymer.2025.128563, veröffentlicht

Hansen, B., Schulze, M., Kamm, B.: Analytical Techniques and Methods for Biomass. Springer Nature, https://doi.org/10.1007/978-3-031-89138-0_2, 10.08.2025, veröffentlicht

Huemer, M., Steiner, K., Bischof, R.H., Ribitsch, D., Gübitz, G.M., España Orozco, S.: Ions and low molecular weight components in sulfite pulp mills strongly reduce or boost lipases activity on lipophilic wood extractives. International Journal of Biological Macromolecules, https://doi.org/10.1016/j.ijbiomac.2025.145853, 07.07.2025, veröffentlicht

Jakob, M., Hochwallner, C., Halbauer, P., Al-Musawi, H., van Herwijnen, H.W.G., Gindl-Altmutter, W. Müller, U.: Robust and dimensionally stable birch wood laminates with increased relative cellulose content and phenol formaldehyde resin impregnation. Carbohydrate Polymer Technologies and Applications       9, 100744, 03.03.2025 (online), veröffentlicht

Janesch, J., Solt-Rindler, A., Dumschat, L., Vay, O., Mija, A., Gindl-Altmutter, W., Rosenau, T., Raffeiner, W., Hansmann, Ch.: Flexible biobased thermosets from epoxidized plant oils: A study of aliphatic cross-linking agents. ACS Applied Polymer Materials, 7, 6, 3686-3697, 12.03.2025, veröffentlicht

Kamm, B., Huemer, K.: Grüne Chemikalien aus der Lignocellulose-Feedstock (LCF) Bioraffinerie. PlusLucis-Grüne (und nachhaltige) Chemie, Plus Lucis 2025, 20-24, 08.11.2025, veröffentlicht

Khalifa, M., Janakiraman, S., Biswal, R., Ghosh, S., Adyam, V., Anandhan, S.: Design and Development of a High-Performance Gel Polymer Electrolyte for Na-Ion Battery from Halloysite Nanotube-Dispersed PVDF Nanofabrics. ACS Applied Engineering Materials, 12.06.2025, veröffentlicht

Khalifa, M., Lammer, H., Bakshi, S.: Cellulose paper-based printed sensor for efficient cure process control in fiber reinforced epoxy composite. Cellulose, 10.1007/s10570-025-06451-9, 28.02.2025, veröffentlicht

Krassnitzer, P., Wetzlmaier, V., Martinz, M., Rauter, R., Mair-Bauernfeind, C., Stern T.: Sustainability in flooring: assessing the environmental and economic impacts of circular business models. Discover Sustainablity, https://doi.org/10.1007/s43621-025-01312-8, 28.05.2025, veröffentlicht

Kurtić, R., Tasić, T., Milanković, V., Anićijević, V.J., Rakočević, L., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarevic-Pašti, T.: Selective Removal of Chlorpyrifos from Contaminated Water Using Young Walnut-Derived Carbon Material as a Sustainable Adsorbent. Processes, https://doi.org/10.3390/pr13103357, 20.10.2025, veröffentlicht

Leiter, H.S., Neudecker, F., Groiß-Fürtner, D.: Life cycle assessment of a straw-based fiberboard without binders produced at laboratory scale. Discover Sustainablity, 6, 837, 17.08.2025, veröffentlicht

Lindenbeck, L., Brand, S., Schatz, F., Stallmann, F., Petersen, N., Beele, B., Pichler, J., Frauscher, M., Süss, R., Olschowski, P., Budnyk, S., Slabon, A., Rodrigues, B.: One-Pot Electrocatalytic Lignin Depolymerization with In-Situ Extraction: A Feasible Approach Toward Biomass-Based Oils. Green Chemistry, https://doi.org/10.1039/D5GC01810B, 16.07.2025, veröffentlicht

Loyer, F., Mauchauffé, R., Tabbaa, M., Husić, I., Boscher, N.D., Mahendran, A.R., Sinic, J., Jocham, Ch., Baba, K.: Liquid‐Assisted Atmospheric Plasma Polymerization of Highly Viscous and Low‐Vapor Pressure Bio‐Based Monomer. Plasma Processes and Polymers. 2025, e70056 https://doi.org/10.1002/ppap.70056, veröffentlicht

Milanković, V., Tasić, T., Brković, S., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarević-Pašti, T.: Sustainable Carbon Materials from Biowaste for the Removal of Organophosphorus Pesticides, Dyes, and Antibiotics. Journal of Environmental Management, https://doi.org/10.1016/j.jenvman.2025.124463, 08.02.2025, veröffentlicht

Nagathan, V., Khalifa, M., Bagawan, A.F., Angadi, B.M., Katti, V.: Dynamics of sub-atmospheric zones and their impact on the fluid flow and heat transfer characteristics of impinging air jet on circular standalone ribbed targets. Heat and Mass Transfer, 19.05.2025, veröffentlicht

Nazari, N., Mirzaee, S., Khachatourian, A.M., Golmohammad, M., Javanmard, A., Sarraf-Mamoory, R., Zahrhuber, R., Unterweger, Ch.: Synthesis of CuO-ZnO/N, P doped 3D rGO hybrid supercapacitive electrode: Fabrication and Electrochemical characterization. Solid State Sciences, https://doi.org/10.1016/j.solidstatesciences.2025.108186, 22.12.2025, veröffentlicht

Nenning, T., Konnerth, J., Gindl-Altmutter, W., Grabner, M., Hansmann, Ch., Eder, L., Bodner S., Pramreiter, M.: Impact bending strength and structural properties of hardwood: branch versus stem. European Journal of Wood and Wood Products, doi.org/10.1007/s00107-025-02247-7, 05.04.2025, veröffentlicht

Nenning, T., Todt, J., Keckes, J., Konnerth, J., Gindl-Altmutter, W., Grabner, M., Tockner, A., Hansmann, Ch., Pramreiter, M.: Position-dependent variations in cell wall orientation of hardwood branches: Evidence from wide-angle X-ray diffraction. Next Materials, https://doi.org/10.1016/j.nxmate.2025.101347, 22.10.2025, veröffentlicht

Neumaier, L., Rauter, L., Zikulnig, J., Schmid, S., Unterweger, Ch., Pretschuh, C., Kosel, J.: Bio-Based Carbon as Functional Material in Sustainable Printed Electronics. Materials Letters, https://www.sciencedirect.com/science/article/abs/pii/S0167577X25014545, 29.08.2025, veröffentlicht

Petersen, N., Carlotto, S., Beele, B., Frauscher, M., Süss, R., Olschowski, P., Casella, G., Slabon, A., Rodrigues, B.: Swimming Upstream – Photocatalytic Depolymerization of Lignosulfonate in Seawater. Green Chemistry, https://doi.org/10.1039/D5GC03734D, 11.09.2025, veröffentlicht

Pfennich, A.Ch., Hirn, U.: Redispersibility of Paper Under Low Agitation and How It Deteriorates over Time. Recycling, https://doi.org/10.3390/recycling10030092, veröffentlicht

Pfennich, A.Ch., Lammer, H., Hirn, U.: Aging Effects on Paper Dispersibility – A Review. BioResources, veröffentlicht

Pichler, C, Lampoltshammer, T, Ranacher, L.M. : Mapping the Digital Transformation of Reverse Logistics: A Multi-Level Taxonomy. Die Bodenkultur – Journal of Land Management, Food and Environment, veröffentlicht

Pretschuh, C., Mihalic, M., Sponner, Ch., Lummerstorfer, T., Steurer, A., Unterweger, Ch.: Physical Foam Injection Molding of Cellulose Fiber Reinforced Polypropylene by using CO2: Parameter Variation and Comparison to Chemical Foam Injection Molding. Journal of Composites Science, https://doi.org/10.3390/jcs9010050, 20.01.2025, veröffentlicht

Rezaei Arjmand, F., Kazemi Najafi, S., Younesi, H., van Herwijnen, H.W.G., Rashidi, A.M.: Effect of Layer Number and Functionalization of Graphene on the Thermal Conductivity and Bond Strength of Urea-Formaldehyde Resin. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2025.2600640, 17.12.2025, veröffentlicht

Saliasi, A., Derbas, M., Pinkl, St., Gindl-Altmutter, W., Riegler, M.: Effects of temporary water submersion on oriented strand board (OSB). Wood Material Science & Engineering, https://doi.org/10.1080/17480272.2025.2565373, 16.10.2025, veröffentlicht

Šálek, P., Karakoti, M., Gupta, S., Kobera, L., Šturcová, A., Steinhart, M., Brus, J., Minisy, I.M., Breitenbach, St., Unterweger, Ch., Hromádková, J., Bober, P.M.: Ultrastable Polypyrrole Stabilized by Hyper-Cross-Linked Poly(styrene-co-divinylbenzene) for Long-Cycle Supercapacitor Applications. ACS Applied Polymer Materials, https://doi.org/10.1021/acsapm.5c03208, 04.11.2025, veröffentlicht

Solt-Rindler, P., Herwijnen H.W.G., Mitter, R., Konnerth, J.: Influence of wood species and pine extractives on the curing behaviour. International Journal of Adhesion and Adhesives, https://doi.org/10.1016/j.ijadhadh.2025.104248, 104248, 07.12.2025, veröffentlicht

Steiner, K., Xiromeriti, A., Lenkova, N., Egermeier, M., Guebitz, G.M., Ribitsch, D.: Unveiling the potential of Gordonia species for decomposition of polyesters. Journal of Biological Macromolecules, https://doi.org/10.1016/j.ijbiomac.2025.147309, 02.09.2025, veröffentlicht

Suarez, S., Konnerth, J., Gierlinger, N., Riegler, M., Tran, A.: Functionalisation of melamine-urea-formaldehyde adhesive wood bondlines with carbon fillers: structures and properties. The Journal of Adhesion, https://doi.org/10.1080/00218464.2025.2579190, 29.10.2025, veröffentlicht

Supriyadi, D., Damayantib, D., Veigel, S., Hansmann, Ch., Gindl-Altmutter, W.: Unlocking the potential of tree bark: Review of approaches from extractives to materials for higher-added value products. Materials Today Sustainability, 29, doi.org/10.1016/j.mtsust.2025.101074, 07.01.2025, veröffentlicht

Teubler, R., Serebrennikova, A., Leitner, E., Fuchs, M., Saf, R., Zojer, K.: Unraveling overlapping processes in the sorption and in the release dynamics of DMSO vapor in paper. Adsorption, https://doi.org/10.1007/s10450-025-00656-x, 02.11.2025, veröffentlicht

Tsekpo, Y.M., Smok, W., Rado, A., Saravanamuthu, S.K.S., Ampah-Essel, J.E., Jarka, P., Tánski, T.: Electrospun calcium pyrophosphate nanowires from Galatea paradoxa shells via a sol–gel route for sustainable functional materials. Materials Science & Engineering B, https://doi.org/10.1016/j.mseb.2025.118908, 06.11.2025, veröffentlicht

Vay, O., Hansmann, Ch.: Anisotropic thermal conductivity as a function of wood density: experimental data comparison across eight wood species. Holzforschung, https://doi.org/10.1515/hf-2025-0097, 23.12.2025, veröffentlicht

Velimirovic Fanfani, M., Bhat, A.M., Burzic, I., Pretschuh, C.: SSbD4CheM project innovations in the textiles, cosmetic and automotive. CSBJ Nanoscience and Advanced Materials. Innovation Report, https://www.csbj.org/article/S2001-0370(25)00091-1/fulltext, 17.03.2025, veröffentlicht

Wang, L., Wang, H., Li, Y., Liu, H., Zheng, Y., Ding, X., Lammer, H., Wu, L., Wenig, Z.: Enhancing Fracture Toughness of Glass Fiber‐Reinforced Polymer Composites via Siloxane Surface‐Modified Core‐Shell Nanoparticles for Wind Turbine Blade Applications in Journal of Applied Polymer Science has the following publication status. Journal of Applied Polymer Science, http://doi.org/10.1002/app.57657, 22.07.2025, veröffentlicht

Zaini, L.H., Surisetty, J., Lammer, H., Veige, St., Gindl-Altmutter, W.: The suitability of fibers from the inner part of oil palm trunks for molded pulp packaging materials. Industrial Crops & Products, https://doi.org/10.1016/j.indcrop.2025.121506, veröffentlicht

Zlatković, M., Kurtić, R., Pašti, I.A., Tasić, T., Milanković, V., Potkonjak, N., Unterweger, Ch., Lazarević-Pašti, T.: Application of Carbon Materials Derived from Nocino Walnut Liqueur Pomace Residue for Chlorpyrifos Removal from Water. Materials, https://www.mdpi.com/1996-1944/18/13/3072, 28.06.2025, veröffentlicht

Bergrath, J., Zeppetzauer, F., Rumpf, J., Putz, R., Kamm, B., Kling, H.W., Schulze, M.: Mechanochemical Tailoring of Lignin Structure: Influence of Different Particle Sizes in the Organosolv Process. Macromolecular Bioscience (Wiley VCH), DOI: 10.1002/mabi.202400090, 24.06.2024, veröffentlicht

Billich E., Sumerskii I., Suleva I., Musl O., Kohlhuber N., Tsetsgee O., Böhmdorfer S., Rosenau T., Potthast A.: Enhancing Molar Mass Distributions of Lignosulfonates with Chemometry-Assisted Functional Group Profiling. ACS Sustainable Chemistry & Engineering, 12, 37, 03.09.2024, veröffentlicht

Boiger, T., Mair‐Bauernfeind, C., Asada, R., Stern, T.: Shifting wood between material and energy use: Modeling the effects of substitution. Journal of Industrial Ecology, 28 (5), 1198-1211, 17.07.2024, veröffentlicht

Derbas, M., Frömel-Frybort, St., Möhring, H.C., Riegler, M.: Accelerated Singular Spectrum Analysis and Machine Learning to investigate wood machining acoustics. Mechanical Systems and Signal Processing, 1, https://doi.org/10.1016/j.ymssp.2024.111879, 27.08.2024, veröffentlicht

Derbas, M., Jaquenmond, A., Frömel-Frybort, St., Güzel, K., Möhring, H.C., Riegler, M.: A Machine Learning Approach to Predict Properties of Wood Products During Milling. Forest Products Journal, doi:https://doi.org/10.13073/FPJ-D-24-00012, 18.05.2024, veröffentlicht

Derbas, M., Young, T.M., Frömel-Frybort, St., Möhring, H.C., Riegler, M.: Predicting wood moisture classes by sound frequency spectra and Explainable Machine Learning during milling. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2024.2420732, 26.10.2024, veröffentlicht

Dilsad, A.M., Ahuja, A., Gupta, N., Bachala, S.K., Rastogi, V.K.: Analysing the impact of nanomaterials on the degradation behaviour of biopolymers: A comprehensive review. European Polymer Journal, 10.1016/j.eurpolymj.2024, 24.06.2024, veröffentlicht

Distler, T., Huemer, K., Bischof, R.H., Guebitz, G.M.: UV detoxification of SSL for fermentation of succinic acid with a succinogenes and polymerisation of lignosulfonates. Biochemical Engineering Journal, https://doi.org/10.1016/j.bej.2023.109191, 01.03.2024, veröffentlicht

Duller, M., Mahendran, A.R., Zikulnig-Rusch, E.M.: Investigating the thermal cure behavior of sorbitol-derived bio-based melamine-formaldehyde impregnation resins using DSC and FTIR analysis. Journal of thermal analysis and calorimetry (JTAC), https://doi.org/10.1007/s10973-024-13423-x, 24.07.2024, veröffentlicht

Egger, F., Schiller, D., Stockinger T., Pretschuh, C., Müller, U., Kaltenbrunner, M.: Direct fabrication of electronic circuits on wooden surfaces. Advanced Sensor Research, https://doi.org/10.1002/adsr.202400010, 15.03.2024, veröffentlicht

España Orozco, S., Huemer, M., Bischof, R.H., Fitz, E.: Investigation of lipolytic enzyme cocktails for removal of lipophilic wood extractives from pulp reveals the advantage of reused process water for reaction efficiency. Journal of Cleaner Production, https://doi.org/10.1016/j.jclepro.2024.140979, 1, 441, 140979, 15.02.2024, veröffentlicht

Gupta, N., Fiedler, M., Lang, M., Fischer, St., Miletzky, F., Rastogi, V.K.: Potential of acetosolv pulping as an environment‑friendly pulping method for spruce, beech, miscanthus, and characterization of handsheets. Cellulose, 10.1007/s10570-024-05850-8, 30.03.2024, veröffentlicht

Gupta, N., Mahendran, A.R., Weiss, St., Khalifa, M.: Thermal curing behavior of phenol formaldehyde resin-impregnated paper evaluated using DSC and dielectric analysis. Journal of thermal analysis and calorimetry (JTAC), https://doi.org/10.1007/s10973-023-12843-5, 01.02.2024, veröffentlicht

Hakim Zaini, L., Solt-Rindler, A., Hansmann, Ch., Veigel, S., Gindl-Altmutter, W.: Lightweight cellulosic insulation panels made from oil palm trunk fibers. Industrial Crops & Products, https://www.sciencedirect.com/science/article/pii/S0926669024014742, 30.08.2024, veröffentlicht

Hogger, E.M., Bliem, P., Griffith, R., van Herwijnen, H.W.G., Stapf, G., Konnerth, J.: A discussion on the various aspects of the minimum pressing time for polyurethane adhesives. The Journal of Adhesion, 1, DOI: 10.1080/00218464.2024.2358076, 30.05.2024, veröffentlicht

Husic, I., Müller, S.M., Mahendran, A.R., Sinic, J., Jocham, Ch., Lammer, H., Griesser, T.: Photocuring behavior of low molecular weight biomass‑derived methacrylate monomers for paper coatings. Journal of Polymer Research, https://doi.org/10.1007/s10965-024-03937-1, 04.03.2024, veröffentlicht

Jakob, M., Janesch, J., Müller, U., Gindl-Altmutter, W.: Mechanical Performance Related to Chemical Variability in Differently Pretreated and Densified Birch Wood. ACS Sustainable Chemistry & Engineering, https://doi.org/10.1021/acssuschemeng.4c07642, 22.10.2024, veröffentlicht 

Khalifa, M., Lammer, H., Anandhan, S.: Ionic Surfactant assisted PVDF nanofabrics with High Dielectric and Excellent Piezoelectric Performance. Fibers and Polymers (FIPO), 10.1007/s12221-024-00603-7, Juni 2024, veröffentlicht

Khalifa, M., Lammer, H., Gupta, N., Wuzella, G.: Paper-Based Sensors for Real-Time Cure Monitoring in the Production of Glass Fiber-Reinforced Phenol-Formaldehyde Composites for Aerospace Interiors. Polymer Composites, 10.1002/pc.29215, 06.11.2024, veröffentlicht

Khalifa, M., Lammer, H., Varsavas, D., Gadad, M.S., Weng, Z.: Recent Advances on Copper/Polymer Nanocomposites: Processing Strategies, Mechanisms, and Antibacterial Efficacy. European Polymer Journal, 10.1016/j.eurpolymj.2024.113637, 16.01.2024, veröffentlicht

Koçoğlu, Ö. B., Pretschuh, C., Unterweger, Ch., Kodal, M., Özkoç, G.: Development of electrically conductive wood-based panels for sensor applications. Polymers, https://doi.org/10.3390/polym16213026, 28.10.2024, veröffentlicht

Krapež Tomec, D., Schöflinger, M., Leßlhumer, J., Žigon, J., Humar, M., Kariž, M.: Effect of thermal modification of wood on rheological and mechanical properties, and dimensional stability of wood-PLA filaments and 3D-printed parts. Wood Science and Technology, https://doi.org/10.1080/17480272.2024.2316740, 15.02.2024, veröffentlicht

Krapež Tomec, D., Schöflinger, M., Leßlhumer, J., Gradišar Centa, U., Žigon, J., Kariž, M.: Effects of Microcrystalline Cellulose Addition on the Properties of Wood-PLA Filaments for 3D Printing. Polymers, doi: 10.3390/polym16060836, 19.03.2024, veröffentlicht

Milanković, V., Tasić, T., Brković, S., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarević-Pašti, T.: Spent Coffee Grounds-Derived Carbon Material as an Effective Adsorbent for Multi-Contaminant Removal from Wastewater: A Comprehensive Kinetic, Isotherm, and Thermodynamic Study. Journal of Water Process Engineering, https://www.sciencedirect.com/science/article/abs/pii/S2214714424007396, 18.05.2024, veröffentlicht

Milanković, V., Tasić, T., Brković, S., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarević-Pašti, T.: The Adsorption Of Chlorpyrifos And Malathion Under Environmentally Relevant Conditions Using Biowaste Carbon Materials. Journal of Hazardous Materials, https://doi.org/10.1016/j.jhazmat.2024.135940, 23.09.2024, veröffentlicht

Milanković, V., Tasić, T., Brković, S., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarević-Pašti, T.: Transforming Food Biowaste into Selective and Reusable Adsorbents for Pesticide Removal from Water. Materials, https://www.mdpi.com/1996-1944/17/22/5499, 11.11.2024, veröffentlicht

Nasseri, L., Rosenfeld, C., Solt-Rindler, P., Mitter, R., Moser, J., Kandelbauer, A., Konnerth, J., van Herwijnen, H.W.G.: Comparison between cure kinetics by means of dynamic rheology and DSC of formaldehyde-based wood adhesives. The Journal of Adhesion, 1, DOI: 10.1080/00218464.2023.2300453, 03.01.2024, veröffentlicht

Nenning, T., Tockner, A., Konnerth, J., Gindl-Altmutter, W., Grabner, M., Hansmann, Ch., Lux, S., Pramreiter, M.: Variability of mechanical properties of hardwood branches according to their position and inclination in the tree. Construction and Building Materials, 12.02.2024, veröffentlicht

Neudecker, F., Veigel, S., Bodner, S.C., Keckes, J., Duchoslav, J., Stifter, D., Gindl-Altmutter, W.: Strong high-density composites from wheat straw. Composites Part A, https://doi.org/10.1016/j.compositesa.2024.108533, 18.10.2024, veröffentlicht

Pasterk, S., Ranacher, L., Stern, T., Schuster, K.C., Aigner, D.J., Hesser, F.: How regenerated cellulose fibers appear in the discourse on marine pollution with microplastic: a snowballing and network approach. Environmental Research Communications, 6 (11), 11.11.2024, veröffentlicht

Ramachandrareddy, B., Solt-Rindler, P., van Herwijnen, H.W.G., Pramreiter, M., Konnerth, J.: Sensitivity of Lap-shear test to errors in groove cutting and influence of wood type/treatment. International Journal of Adhesion and Adhesives, 130, März 2024, veröffentlicht

Rauter, L., Jose, M., Weiss, St., Moser, O., Pandur, St., Kosel, J.: Transparent Touch Sensors on Wood: Sustainable Development with Aesthetic Integrity. IEEE Sensors, DOI 10.1109/JSEN.2024.3391828, Juni 2024, veröffentlicht

Rosenfeld, C., Sailer-Kronlachner, W., Solt-Rindler, P., Broeren, M., van Herwijnen, H.W.G.: Fruktose-basierter Klebstoff für nachhaltige Holzwerkstoffe. Holztechnologie, 64, 53-59, September 2024, veröffentlicht

Saravanamuthu, S.K.S., Mahendran, A.R., Wuzella, G., Weiss, St., Schöffmann, E.: Investigation of the formation of epoxy-imidazole adducts and the kinetic triplets during thermal curing of a bio-based and petrochemical epoxy with anhydride. Journal of thermal analysis and calorimetry (JTAC), DOI: 10.1007/s10973-024-13415-x, 30.07.2024, veröffentlicht

Savandaiah, C., Kapshammer, A., Plank, B., Stolcer, V., Marschik, Ch., Major, Z.: Thermo-mechanical characterisation of polycarbonate-based sheet moulded composites fabricated from off-cut waste unidirectional tapes. Express Polymer Letters, 05.06.2024, veröffentlicht

Steiner, K., Leitner, V., Zeppetzauer, F., Ostner, D., Bischof, R.H., Rennhofer, H., Bartl, A., Ribitsch, D., Guebitz, G.M.: Optimising chemo-enzymatic separation of polyester cellulose blends. Resources, Conservation & Recycling, https://doi.org/10.1016/j.resconrec.2023.107369, 01.03.2024, veröffentlicht

Suarez, S., Sandhacker, M., Logar, L., Riegler, M., Arminger, B., Konnerth, J., Gindl-Altmutter, W., Tran, A.: Non-invasive method to measure bulk electrical resistivity of spruce wood – influence of moisture content and anatomical direction. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2024.2401595, 10.09.2024, veröffentlicht

Tasić, T., Milanković, V., Potkonjak, N., Unterweger, Ch., Pašti, I.A., Lazarević-Pašti, T.: Valorization of Viscose Textile Waste for the Adsorptive Removal of Organophosphate Pesticides from Water. Journal of Water Process Engineering, https://doi.org/10.1016/j.jwpe.2024.106793, 12.12.2024, veröffentlicht 

Tasić, T., Milanković, V., Unterweger, Ch., Fürst, Ch., Breitenbach, St., Pašti, I.A., Lazarević-Pašti, T.: Highly Porous Cellulose-based Carbon Fibers as Effective Adsorbents for Chlorpyrifos Removal: Insights and Applications. C — Journal of Carbon Research, https://www.mdpi.com/2311-5629/10/3/58, 27.06.2024, veröffentlicht

Unterweger, Ch., Gavrilov, N., Breitenbach, St., Fürst, Ch., Pašti, I.A.: Variation in activation parameters for the preparation of cellulose-based porous carbon fibers used for electrochemical applications. Fibers, https://www.mdpi.com/2079-6439/12/6/46, 27.05.2024, veröffentlicht

Unterweger, Ch., Schlapp-Hackl, I., Fürst, Ch., Robertson, D., Jung Cho, M., Hummel, M.: Carbon fibers based on cellulose-lignin hybrid filaments: Role of dehydration catalyst, temperature and tension during continuous stabilization and carbonization. Fibers, https://www.mdpi.com/2079-6439/12/7/55, 30.06.2024, veröffentlicht

Varsavas, S.D., Michalec, P., Khalifa, M., Li, P., Spintzyk, S.: Cytocompatibility of Polymers for Skin-Contact Applications Produced via Pellet Extrusion. Journal of Functional Biomaterials, 10.3390/jfb15070179, 29.06.2024, veröffentlicht

Wenger, J., Jäger, G., Näyhä, A., Plakolb, S., Krassnitzer, P.E., Stern, T.: Exploring potential diffusion pathways of biorefinery innovations – An agent‐based simulation approach for facilitating shared value creation. Business Strategy and the Environment, 3 (5), 4652-4693, 22.02.2024, veröffentlicht

Wolfsgruber, M., Bischof, R.H., Paulik, Ch., Slabon, A., Rodrigues, B.V.M.: Revisiting the electrocatalytic hydrogenation of furfural to furfuryl alcohol using biomass-derived electrolytes. RSC Sustainability, https://doi.org/10.1039/D4SU00040D, 1, 18.03.2024, online veröffentlicht

Aigner, D., Hinterholzer, L., Almhofer, L., Bischof, R.H., Wrodnigg, T.M.: Conversion of Xylose into D-Xylitol using Catalytic Transfer Hydrogenation with Formic Acid as H-Donor. BioResources, 18, 4, 8631-8652, 31.10.2023, veröffentlicht

Almhofer, L., Paulik Ch., Bischof, R.H.: Simultaneous posthydrolysis and liquid–liquid extraction: a SIMPLLE process to detoxify eucalyptus prehydrolysis liquor. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-04570-6, 24.07.2023, veröffentlicht online“

Averina, E., Konnerth, J., van Herwijnen, H.W.G., Li, K.: Investigation of poly (styrene-4-vinylbenzyl chloride) as a curing agent for alternative plant proteins. The Journal of Adhesion, https://doi.org/10.1080/00218464.2023.2231381, 02.06.2023, veröffentlicht

Bartolome, M. J., Padhi, S.S.P., Fichtberger, O.G., Schwaiger, N., Seidl, B., Kozich, M., Nyanhongo, G.S., Guebitz, G. M.: Improving properties of starch-based adhesives with carboxylic acids and enzymatically polymerized lignosulfonates. International Journal of Molecular Sciences, 23, 135457, 04.11.2022, veröffentlicht

Breitenbach, St., Knapic, D., Unterweger, Ch., Fürst, Ch., Hassel, A.W.: Lignin-based porous junction for silver-silver chloride reference electrodes. Journal of Electrochemical Science and Engineering, https://doi.org/10.5599/jese.1520, 30.01.2023, veröffentlicht

Ebner, S., Spirk, S., Stern, T., Mair-Bauernfeind, C.: How Green are Redox Flow Batteries? ChemSusChem 2023, e202201818. 01.02.2023, veröffentlicht

Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Anandhan, S.: A new multifunctional energy harvester based on mica nanosheets-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects. RSC applied Polymer science, 10.1039/D3LP00080J, veröffentlicht

Ekbote, G., Khalifa, M., Venkatesa Perumal, B., Srinivasan, A.: Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics. Flexible and Printed Electronics, 10.1088/2058-8585/acd010, 02.05.2023, veröffentlicht

Derbas, M., Frömel-Frybort, St.., Laaber, C., Möhring, H.C., Riegler, M.: Supervised classification of wood species during milling based on extracted cut events from ultrasonic air-borne acoustic signals. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2023.2214118, 22.05.2023, veröffentlicht

Derbas, M., Jaquenmond, A., Frömel-Frybort, St., Güzel, K., Möhring, H.C., Riegler, M: Multisensor data fusion and machine learning to classify wood products and predict workpiece characteristics during milling. CIRP: Journal of manufacturing science and technology, 27.09.2023, veröffentlicht

Derflinger, Ch., Kamm, B., Leitner, G., Paulik, Ch.: Novel synthesis strategy for the production of fully bio-based binders using 2,5-diformylfuran. European Journal of Organic Chemistry, 26 (23) 2023, https://doi.org/10.1002/ejoc.202300311, 10.05.2023, veröffentlicht

Derflinger, Ch., Kamm, B., Meissner, G., Spod, H., Paulik, Ch.: Development of a consolidated heterogeneous chemical process for selective oxidation of HMF for industrial upscaling. Chemistry Select, https://doi.org/10.1002/slct.202302056, 09.10.2023, veröffentlicht

Dhanalakshmi, J., Saravanamuthu, S.K.S., Sivaprakash, S., Vijayakumar, Ch.T.: Studies on thermoset blend of bismaleimide having multiple S.: groups and biscyanate ester. Journal of Elastomers & Plastics, https://doi.org/10.1177/00952443231158780, 15.02.2023, veröffentlicht

Distler, T., Huemer, K., Leitner, V., Bischof, R.H., Groiß, H., Guebitz, G. M.: Production of bacterial cellulose by Komagateibacter intermedius from spent sulfite liquor. Bioresource Technology Reports, 24, 101655, https://doi.org/10.1016/j.biteb.2023.101655, 01.12.2023, veröffentlicht

Ferdinand, M., Vardai, R. Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Impact modification of PP with short PET fibres: Effect of heat setting on fiber characteristics and composite properties. Composite Structures, 311, 16.02.2023, veröffentlicht

Gavrilov, N., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A.: Exploring the Impact of DAHP Impregnation on Activated Carbon Fibers for Efficient Charge Storage and Selective O2 Reduction to Peroxide C. https://doi.org/10.3390/c9040105, 06.11.2023, veröffentlicht

Goto, T., Zaccaron, S., Hettegger, H., Bischof, R.H., Fackler, K., Potthast, A., Rosenau, T.: Evaluating chelating agents and their effects on cellulosic pulps during P-stage bleaching. Part 1: analytical method development. Cellulose, 30, 3887–3900, 04.03.2023, veröffentlicht

Gritsch, S.M., Mihlyi, S., Bartl, A., Ipsmiller, W., Jan-Halver, U., Putz, R., Quartinello, F., Gübitz, G.M.: Closing the cycle: Enzymatic recovery of high purity glucose and polyester from textile blends. Resources, Conservation and Recycling, 188, 106701, https://doi.org/10.1016/j.resconrec.2022.106701, 31.01.2023, veröffentlicht

Gupta, N., Mahendran, A.R., Khalifa, M.: Application of Printed Paper Sensors in Characterizing Curing Behavior of Thermosetting Resin Systems Using Dielectric Spectroscopy. IEEE Xplore, DOI: 10.1109/IWIS61214.2023.10302760, veröffentlicht

Hesser, F., Groiß-Fürtner, D., Woitsch, L., Mair-Bauernfeind, C.: Ex-Ante Eco-Efficiency Assessment of Dendromass Production: Conception and Experiences of an Innovation Project. Land 2023, https://doi.org/10.3390/land12040839, 12, 839, 06.04.2023, veröffentlicht

Husić, I., Mahendran, A.R., Sinic, J., Jocham, Ch., Lammer, H.: Interaction of porous substrate and vegetable oil-based hydrophobic thermoset coatings during UV-polymerization. Journal of Plastic Film and Sheeting, 39, 4, https://doi.org/10.1177/87560879231190574, 04.10.2023, veröffentlicht

Janesch, J., Bacher, M., Padhi, S.S.P., Rosenau, T., Gindl-Altmutter, W., Hansmann, Ch.: Bio-based alkyd resins from plant oil and furan-2,5-dicarboxylic acid. ACS Sustainable Chemistry & Engineering, 11, 50, 17625–17632, 04.12.2023, veröffentlicht

Jaxel, J., Merio, A., Kohlhuber, N., Beaumont, M., Wimmer, R., Rosenau, T., Hansmann, Ch., Liebner, F., Böhmdorfer, S.: Facile chemical hydrophobization of thin-layer plates by vapor deposition of methyltrimethoxysilane for reversed-phase chromatography. JPC – Journal of Planar Chromatography – Modern TLC, https://doi.org/10.1007/s00764-023-00258-9, 2023, veröffentlicht

Khalifa, M., Berndt, A., Shamitha, C., Lammer, H., Wuzella, G.: Hybridization Effect of Cellulose Paper and Post-curing Conditions on the Mechanical Properties of Flax Fiber Reinforced Epoxy Bio-Composite. Journal of applied polymer science, 10.1002/app.20222123, 10.01.2023, veröffentlicht

Khalifa, M., Gupta, N., Bagawan, A. H., Lammer, H., Wuzella, G.: Multifunctional PVDF Film Embedded with Surfactant Assisted-Graphene with Excellent Piezo-capacitance. Piezoelectric and Triboelectric Properties for Various Applications, Polymer, 10.1016/j.polymer.2023.126383, veröffentlicht

Khalifa, M., Wuzella, G., Lammer, H.: The Green Catalyst: Role of Hemp Fibers in the Curing Reaction of Bio-Based Epoxy Composites. Materials Today Communications, 10.1016/j.mtcomm.2023.107052, veröffentlicht

Kienberger, M., Demmelmayr, P., Leitner, V., Egermeier, M.: Selective isolation of acetic acid and lactic acid from heterogeneous fermentation of xylose and glucose. Environmental Technology & Innovation, 29, https://doi.org/10.1016/j.eti.2023.103024, 01.02.2023, veröffentlicht

Krassnitzer, P., Wenger, J., Stern, T.: Techno-economic learning in biorefinery research: a meta-level perspective of three exemplary cases. Biofules, Bioproducts and Biorefining, 13.10.2023, veröffentlicht

Kubik, P., Sebek, F., Krejci, P., Brabec, M., Tippner, J., Dvoracek, O., Lechowicz, D., Frömel-Frybort, St.: Linear woodcutting of European beech: Experiments and computations. Wood Science and Technology, 57, 51-74, Jänner 2023, veröffentlicht

Lazarević-Pašti, T., Jocic, A., Milankovic, V., Tasic, T., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pasti, I.: Kinetics of dimethoate, malathion, and chlorpyrifos adsorption on cellulose-derived activated carbons – linking performance to physicochemical properties of the adsorbents. Materials Today Communications, 13.06.2023 veröffentlicht

Leitner, V., Aufischer, G., Solt-Rindler, P., Streffer, F., Gabler, C., Noack, J., van Herwijnen, H.W.G., Paulik, Ch.: Agricultural residue lignin from novel low temperature pre-treatment as potential raw material for LPF resins. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-04028-9, 09.03.2023, veröffentlicht

Mihalic, M., Pretschuh, C., Lummerstorfer, T., Unterweger, Ch.: Physical and Chemical Foam Injection Moulding of Natural Fibre Reinforced Polypropylene – Assessment of weight reduction potential and mechanical properties. Journal of Composites Science, https://www.mdpi.com/2504-477X/7/4/144, 06.04.2023, veröffentlicht

Milan, F., Vardai, R., Lummerstorfer, T., Pretschuh, C., Gahleitner, M., Moczo, J., Pukanszky, B.: Comparison of the effect and efficiency of two impact modification approaches in polypropylene. Express Polymer Letters, 17, 8, 837-849,     27.04.2023, veröffentlicht

Nasseri, L., Rosenfeld, C., Solt-Rindler, P., Mihalic, M., Kandelbauer, A., Konnerth, J., van Herwijnen, H.W.G.: Determination of the gel point of formaldehyde-based wood adhesive by using a multiwave technique. ACS Applied Polymer Materials, 5, 8, 6354, 01.08.2023, veröffentlicht

Pfennich, A.Ch., Schöffmann, E.A., Lammer, H., Hirn, U.: Water-dispersible paper for packaging applications – balancing material strength and dispersibility. Nordic Pulp and Paper Research Journal, https://doi.org/10.1515/npprj-2023-0048, 26.09.2023, veröffentlicht

Preimesberger, Ch., Solt-Rindler, A., Hansmann, Ch., Pfeifer, C.: Influence of size and temperature on the auto-ignition characteristics of solid beech and spruce wood. Fuel, https://doi.org/10.1016/j.fuel.2022.127140, 127140, 01.04.2023, veröffentlicht

Preimesberger, Ch., Wondrak, M., Solt-Rindler, A., Pfeifer, C., Hansmann, Ch.: Size and temperature dependent oxidative pyrolysis and auto-ignition of spherical beech and spruce wood. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-03977-5, 25.02.2023, veröffentlicht

Ranjith, A., Mahendran, A.R., Rajkumar, T.: Novel Self Curable phosphorous and spiro phosphorous based maleimides: synthesis, characterization, cure bahavior and thermal properties. Phosphorus, Sulfur, and Silicon and the Related Elements, DOI: 10.1080/10426507.2023.2176499, 20.02.2023, veröffentlicht

Rauter, L., Zikulnig, J., Moldaschl, Th., Holzman, D., Neumaier, L., Khalifa, M., Faller, L. M., Kosel, J.: Printed wireless battery-free sensor tag for health monitoring of polymer composites. IEEE Xplore, 10.1109/JFLEX.2023.3277802,             01.03.2023, veröffentlicht

Rußmayer, H., Egermeier, M., Marx, H. Leitner, V., Sauer, M.: Entirely oil palm-based production of 1,3-propanediol with Lentilactobacillus diolivorans. Environmental Technology & Innovation, https://doi.org/10.1016/j.eti.2023.103024, 19.01.2023, veröffentlicht

Saravanamuthu, S.K.S., Syed Mohammed, S.R., Dhanalakshmi, J., Mahendran, A.R., Vijayakumar Ch.T.: Fumarate metal organic frameworks as reactive and curing reaction alternant in hydrophobic bispropargyl ether based matrix resin system. Journal of Polymer Research, https://doi.org/10.1007/s10965-023-03817-0, veröffentlicht

Schierer, V., Rieder-Gradinger C., Rosenberg, E.: Method comparison for the identification and characterization of odorants from Scot’s pine (Pinus sylvestris) and OSB made thereof by GC-MS and GC-FID/O using different headspace techniques.           C+46:58hemosensors, 11, 10, 543, 19.10.2023, veröffentlicht

Slavec, A., Hoeben, A., Moreno-Torres, M, Primozic, L., Stern, T.: When intentions do not matter: Climate change mitigation and adaptation innovations in the Forest-based sector. Forest Policy and Economics, Volume 157, 01.12.2023, veröffentlicht

Solt-Rindler, A., Busquets-Ferrer, M., Averina, E., Solt-Rindler, P., Vay, O., Gindl-Altmutter, W., van Herwijnen, H.W.G., Hansmann, Ch.: Hochleistungsmaterialien aus nachwachsenden Rohstoffen. Holztechnologie, 63, 4, 05.-12.2023, veröffentlicht

Stockinger, T., Steiner, M., Egger, F., Padinger, F., Schwödiauer, R., Wilmer, D., Mahendran, A.R., Kaltenbrunner, M., Müller, U.: High porous, ultra-thin paper sensors − An option for successful sensor integration. Sensors and Actuators A: Physical, 350 (2023), https://authors.elsevier.com/c/1gIgw3IC9dBKKe, 13.12.2022 (online), 2023 (print), veröffentlicht

Tasić, T., Milanković, V., Batalović, K., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Pašti, I.A., Lazarević-Pašti, T.: Application of viscose‐based porous carbon fibers in food processing – malathion and chlorpyrifos removal. Foods, https://www.mdpi.com/2304-8158/12/12/2362, 13.06.2023, veröffentlicht

Vijayakumar, Ch.T., Saravanamuthu, S.K.S., Mahendran, A.R., Syed Mohammed, S.R.: Application of Metal Organic Frameworks as Reactive filler in Bisphenol A based High temperature Thermosets. Intech Open, 07.12.2022, veröffentlicht

Vladan, A., Tasić, T., Milanković, V., Breitenbach, St., Unterweger, Ch., Fürst, Ch., Bajuk-Bogdanović, D., Pašti, I.A., Lazarević-Pašti, T.: How well do our adsorbents actually perform? – The case of dimethoate removal using viscose fibers-derived carbons. International Journal of Environmental Research and Public Health,             https://www.mdpi.com/1660-4601/20/5/4553, 06.03.2023, veröffentlicht

Wolfsgruber, M., Patil, P., Pichler, C. M., Bischof, R.H., Budnyk, S., Paulik, Ch., Slabon, A.: Potential dependence of gluconic acid to glucose electroreduction on silver. Catalysis Science & Technology, https://doi.org/10.1039/D3CY00897E, 30.08.2023, online veröffentlicht

Wurzer, G. K., Bacher, M., Musl, O., Kohlhuber, N., Sulaeva, I., Kelz, T., Fackler, K., Bischof, R.H., Hettegger, H., Potthast, A., Rosenau, T.: From liquid to solid-state, solvent-free oxidative ammonolysis of lignins–an easy, alternative approach to generate “N-lignins”. RSC advances, 13, 14, 9479-9490, 01.10.2023, veröffentlicht

Zeppetzauer, F., Süss, R., Nadányi, R., Putz, R., Lisý, A., Paulik, Ch., Šurina, I., Strižincová, P., Huemer, K., Kamm, B.: Environmentally friendly extraction from Picea abies bark as an approach to accessing valuable antioxidants in biorefineries. Molecules, https://www.mdpi.com/2227-9717/11/7/2145, 18.07.2023, veröffentlicht 

Almhofer, L., Paulik, C., Bammer, D., Schlackl, K., Bischof, R.H.: Contaminations impairing an acetic acid biorefinery: Liquid-liquid extraction of lipophilic wood extractives with fully recyclable extractants. Separation and Purification Technology, https://doi.org/10.1016/j.seppur.2022.122869, 15.12.2022, veröffentlicht

Almhofer, L., Bischof, R.H., Madera, M., Paulik, C.: Kinetic and Mechanistic Aspects of Furfural Degradation in Biorefineries. The Canadian Journal of Chemical Engineering, https://doi.org/10.1002/cjce.24593, 05.08.2022, veröffentlicht

Arminger, B., Gindl-Altmutter, W., Hansmann, C.: Efficient recovery of superhydrophobic wax surfaces on solid wood. European Journal of Wood and Wood Products, https://doi.org/10.1007/s00107-022-01793-8, 06.02.2022, veröffentlicht

Aufischer, G., Kamm, B., Paulik, C.: Depolymerisation of kraft-lignin towards high value-added products: antioxidants and UV absorber. Holzforschung/Wood Research and Technology (DE GRUYTER), 76, 9, 845-852, https://doi.org/10.1515/hf-2022-0023, 12.07.2022, veröffentlicht

Averina, E., Konnerth, J., van Herwijnen, H.W.G.: Protein adhesives: Investigation of factors affecting wet strength of alkaline treated proteins crosslinked with glyoxal. Polymers, 14, 20, 4351, 15.10.2022, veröffentlicht

Averina, E., Konnerth, J., van Herwijnen, H.W.G.: Protein-based Glyoxal-Polyethyleneimine-crosslinked adhesives for wood bonding. Journal of Adhesion, https://doi.org/10.1080/00218464.2021.2020111, 16.01.2022, veröffentlicht

Bartuska, B., Teischinger, A., Riegler, M.: Effects of Spatial Augmented Reality Assistance on the efficiency of Prefabricating Timber Frame Walls. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2022.2085528, 10.06.2022, veröffentlicht

Breitenbach, S., Duchoslav, J., Mardare, A.I., Unterweger, C., Stifter, D., Hassel, A.W., Fürst, C.: Comparative Behavior of Viscose-Based Supercapacitor Electrodes Activated by KOH, H₂O, and CO₂. Nanomaterials, https://doi.org/10.3390/nano12040677, 18.02.2022, veröffentlicht

Burzic, I., Bolka, S., Miketa, F., Brkic, F., Bobovnik, R., Nardin, B., Vuurens, H., Licata, J.: PLA-PHA blends: biodegradation, morphology, mechanical and thermal properties. TECHNOLOGY, 30.06.2022, long abstract for Circulability Conference in Slovenia, 12. – 14.09.2022, akzeptiert

Busquets Ferrer, M., Solt-Rindler, A., Vay, O., Hansmann, C., Gindl-Altmutter, W.: Bark based porous materials obtained with a simple mechanical foaming procedure. European Journal of Wood Products, https://doi.org/10.1007/s00107-022-01856-w, 08.10.2022, veröffentlicht

Busquets Ferrer, M., Solt-Rindler, A., Hansmann, C., Gindl-Altmutter, W.: Fully bio-based composite foams made of wheat gluten and disintegrated spruce tree bark. Results in Materials, 15, 100299, Juni 2022, veröffentlicht

Derflinger, C., Kamm, B., Paulik, C., Meissner, G., Spod, H.: Efficient and Selective Oxidation of HMF to DFF at moderate reaction conditions by means Ru/Al2O3. Chemistry Select, https://doi.org/10.1002/slct.202201211, 22.09.2022, publiziert

Enengl, C., Unterweger, C., Lone, S.A., Fürst, C.: Screening of spinning oils for melt-spun lignin-based carbon fiber precursors. Journal of Applied Polymer Science, https://doi.org/10.1002/app.52134, 10.01.2022, veröffentlicht

Fürtner, D., Perdomo Echenique, E.A., Hoertenhuber, S.J., Schwarzbauer, P., Hesser, F.: Beyond Monetary Cost-Benefit Analyses: Combining Economic, Environmental and Social Analyses of Short Rotation Coppice Poplar Production in Slovakia. Forests, 13(2), 349, 19.02.2022, veröffentlicht

Ganesan, J., Jeyadevi, S., Saravanamuthu, S.K.S., Mahendran, A.R., Vijayakumar, C.T.: Thermal, mechanical, and electrical properties of difunctional and trifunctional epoxy blends with nanoporous materials. Journal of Elastomers and Plastics, https://doi.org/10.1177/00952443211060400, 10.12.2021, veröffentlicht

Gupta, N., Mahur, B.K., Dilsad Izrayeel, A.M., Ahuja, A., Kumar Ratogi, V.: Biomass conversion of agricultural waste residues for different applications: a comprehensive review. Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-022-22802-6, 08.09.2022, veröffentlicht

Gupta, S., Zasonska, B., Acharya, U., Konefal, M., Pokorny, V., Petrovsky, E., Breitenbach, S., Unterweger, C., Bober, P.: Magnetoconductive poly(3,4-ethylenedioxythiophene)/maghemite adsorbent for the removal of Reactive Black 5 from aqueous media. Materials Chemistry and Physics, https://doi.org/10.1016/j.matchemphys.2022.126753, 29.09.2022, veröffentlicht

Haas, V., Wenger, J., Ranacher, L., Guigo, N., Sousa, A., Stern T.: Developing future visions for bio-plastics substituting PET – a backcasting approach. Sustainable Production and Consumption, 31, 370-383, 28.02.2022, veröffentlicht

Huemer, K., Lanthaler, K., Weber, H., Weber, H.K.: Part 1: In-Depth Investigation of Potential Growth Inhibitors for Microorganisms Used for the Production of Value-Adding Products from Spent Sulphite Liquor. Lenzinger Berichte, 97, 11, 68-88, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_11.pdf, 13.10.2022, publiziert

Huemer, K., Olschowski, P., Distler, T., Lanthaler, K., Weber, H., Weber, H.K.: Part 2: Elucidating the Interactions of Growth Inhibitors from Spent Sulphite Liquor with Aerobic and Anaerobic Microorganisms. Lenzinger Berichte, 97, 12, 89-98, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_12.pdf, 13.10.2022, publiziert

Huemer, K., Lanthaler, K., Weber, H., Weber, H.K.: Part 3: Detoxification of Spent Sulphite Liquor to Remove Growth Inhibitors in Microbial Transformations. Lenzinger Berichte, 97, 13, 99-108, https://www.lenzing.com/fileadmin/content/PDF/03_Forschung_u_Entwicklung/EN/Lenzinger_Berichte_97_2022_13.pdf, 13.10.2022, publiziert

Jakob, M., Mahendran, A.R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., Veigel, S.: The Strength and Stiffness of Oriented Wood and Cellulose-Fibre Materials: A Review. Progress in Materials Science, https://doi.org/10.1016/j.pmatsci.2021.100916, Vol 125, 100916, April 2022, veröffentlicht

Jocić, A., Breitenbach, S., Pašti, I.A., Unterweger, C., Fürst, C., Lazarević-Pašti, T.: Viscose-derived activated carbons as adsorbents for malathion, dimethoate, and chlorpyrifos – screening, trends and analysis. Environmental Science and Pollution Research, https://pubmed.ncbi.nlm.nih.gov/35044608/, 19.01.2022, veröffentlicht

Jocić, A., Breitenbach, S., Bajuk-Bogdanović, D., Pašti, I.A., Unterweger, C., Fürst, C., Lazarević-Pašti, T.: Viscose-derived activated carbons fibers as highly efficient adsorbents for dimethoate removal from water. Molecules, https://doi.org/10.3390/molecules27051477, 22.02.2022, veröffentlicht

Khalifa, M., Berndt, A., Shamitha, C., Lammer, H., Wuzella, G.: Hybridization Effect of Cellulose Paper and Post-curing Conditions on the Mechanical Properties of Flax Fiber Reinforced Epoxy Bio-Composite. Journal of Applied Polymer Science, https:\\10.1002/app.20222123, 01.10.2022, akzeptiert

Kovacevic, M., Rieder-Gradinger, C., Teischinger, A., Srebotnik, E.: Volatile organic compounds emitted from Scots pine and Norway spruce wood. European Journal of Wood Products, https://doi.org/10.1007/s00107-022-01909-0, 27.12.2022, veröffentlicht

Lehrhofer, A.F., Goto, T., Kawada, T., Rosenau, T., Hettegger, H.: The in vitro synthesis of cellulose – A mini-review. Carbohydrate Polymers, https://doi.org/10.1016/j.carbpol.2022.119222, online, 07.02.2022, 01.06.2022, veröffentlicht

Lindemann, M., Widhalm, B., Kuncinger, T., Srebotnik, E.: Potential of a year-round, closed-loop process for microbial VOC reduction in pinewood strands by Pseudomonas putida PX1 cultivated in seasonally varying MDF process effluents. Bioresource Technology Reports, https://doi.org/10.1016/j.biteb.2022.100995, 28.02.2022, veröffentlicht

Mahendran, A.R., Wuzella, G., Pichler, S., Lammer, H.: Properties of Different Chemically Treated Woven Hemp Fabric Reinforced Bio-Composites. Journal of Renewable Materials, https:\\doi:10.32604/jrm.2022.017835, 20.01.2022, veröffentlicht

Malkamaki, A., Korhonen, J.E., Berghall, S., Rustas, C.B., Berno, H., Carreira, A., D’Amato, D., Dobrovolsky, A., Giertliova, B., Holmgren, S., Mark-Herbert, C., Masiero, M., Nagy, E., Navratilova, L., Puelzl, H., Ranather, L., Secco, L., Suomala, T., Toppinen, A., Valsta, L., Vybostok, J., Zellweger, J.: Public perceptions of using forests to fuel the European bioeconomy: findings from eight university cities. Forest Policy and Economics, 140, 102749, 01.07.2022, veröffentlicht

Milakin, K.A., Gupta, S., Pop-Georgievski, O., Morávková, Z., Acharya, U., Taboubi, O., Breitenbach, S., Gavrilov, N., Unterweger, C., Bober, P.: Macroporous nitrogen-containing carbon for electrochemical capacitors. Electrochimica Acta, https://doi.org/10.1016/j.electacta.2022.140370, 11.04.2022, veröffentlicht

Padhi, S., Bartolome, M.J., Nyanhongo, G.S., Schwaiger, N., Pellis, A., van Herwijnen, H.W.G., Gübitz, G.: Role of surface enhancement in the enzymatic cross-linking of lignosulfonate using alternative downstream techniques. ACS Omega, 7, 23749, 27.06.2022, veröffentlicht

Perdomo Echenique, E.A., Ryberg, M., Eldbjørg, B.V., Schwarzbauer, P., Hesser, F.: Analyzing the Consequences of Sharing Principles on Different Economies: A Case Study of Short Rotation Coppice Poplar Wood Panel Production Value Chain. Forests, 13(3), 461, 16.03.2022, veröffentlicht

Pichler, C., Fürtner, D., Hesser, F., Schwarzbauer, P., Ranacher, L.: The Role of the Social Licence to Operate in the Emerging Bioeconomy – A Case Study of Short-Rotation Coppice Poplar in Slovakia. Land, 11, 1555, 14.09.2022, veröffentlicht

Ramachandrareddy, B., van Herwijnen, H.W.G., Greeley, B., Bredesen, R., Konnerth, J.: Mechanical properties of wood adhesive bond lines tested in service classes according to Eurocode 5. International journal of adhesion and adhesives, https://doi.org/10.1016/j.ijadhadh.2022.103233, 02.08.2022, veröffentlicht

Rosenfeld, C., Solt-Rindler, P., Sailer-Kronlachner, W., Kuncinger, T., Konnerth, J., Geyer, A., van Herwijnen, H.W.G.: Effect of mat moisture content, adhesive amount and press time on the performance of particleboards bonded with fructose-based adhesive. Materials, 15, 23, 8701, 06.12.2022, veröffentlicht

Rosenfeld, C., Sailer-Kronlacher, W., Konnerth, J., Solt-Rindler, P., Pellis, A., Rosenau, T., Potthast, A., van Herwijnen, H.W.G.: Hydroxymethylfurfural: A key to increased reactivity and performance of fructose-based adhesives. Industrial crops and products, 187, 115536, 30.08.2022, veröffentlicht

Sailer-Kronlachner, W., Rosenfeld, C., Böhmdorfer, S., Konnerth, J., van Herwijnen, H.W.G.: Influence of critical synthesis parameters and precursor stabilization on the development of adhesive strength in Fructose-HMF-Amine Adhesives. Forest Products Journal, 72, 1, 29.12.2022, veröffentlicht

Sailer-Kronlachner, W., Rosenfeld, C., Böhmdorfer, S., Bacher, M., Konnerth, J., Rosenau, T., Potthast, A., Geyer, A., van Herwijnen, H.W.G.: Scale-Up of 5-Hydroxymethylfurfural rich adhesive precursor production and structural features of humin side products. Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-022-03200-x, 17.08.2022, veröffentlicht

Saravanamuthu, S.K.S., Shamim Rishwana, S., Ramani, R., Mahendran, A.R., Vijayakumar, C.T.: Particulate Reinforcements in Dicyanate Composites with Nanoporous Aluminum Fumarate as Reactive Filler: Thermal Properties. Polymer (Korea), https://doi.org/10.7317/pk.2022.46.4.426, Vol. 46, No. 4, pp.426-435, veröffentlicht

Savandaiah, C., Sieberer, S., Steinbichler, G.: Additively Manufactured Composite Lug with Continuous Carbon Fibre Steering Based on Finite Element Analysis. Materials, https://doi.org/10.3390/ma15051820, 28.02.2022, veröffentlicht

Savandaiah, C., Sieberer, St., Plank, B., Maurer, J., Steinbichler, G., Sapkota, J.: Influence of Rapid Consolidation on Co-Extruded Additively Manufactured Composites. Polymers, https://doi.org/10.3390/polym14091838, 29.04.2022, veröffentlicht

Savandaiah, C., Maurer, J., Plank, B., Steinbichler, G., Sapkota, J.: Rapid Consolidation of 3D Printed Composite Parts Using Compression Moulding for Improved Thermo Mechanical Properties. Rapid Prototyping Journal, https://doi.org/10.1108/RPJ-11-2021-0311, 14.06.2022, veröffentlicht

Schöffmann, E., Mahendran, A.R., Zikulnig-Rusch, E.M., Plank, H.: Advancement and challenges in sample preparation for atomic force microscopy and infrared microscopy for wood‐based materials. Journal of Microscopy, http://doi.org/10.1111/jmi.13154, 17.10.2022, veröffentlicht

Stockinger, T., Steiner, M., Egger, F., Padinger, F., Schwödiauer, R., Wilmer, D., Mahendran, A.R., Kaltenbrunner, M., Müller, U.: High porous, ultra-thin paper sensors – An option for successful sensor integration. Sensors and Actuators: A Physical, https://doi.org/10.1016/j.sna.2022.114098, 01.02.2023, veröffentlicht

Sumerskii, I., Solt-Rindler, P., van Herwijnen, H.W.G., Sulaeva, I., Ters, T., Rosenau, T., Potthast, A.: Lignin-containing PMDI-Binder for Wood Particle Board Production. Lenzinger Berichte, 97, 109, 01.10.2022, veröffentlicht

Süss, R., Zeilerbauer, L., Kamm, B., Meißner, G., Spod, H., Paulik, C.: Depolymerisation of Organosolv Lignin by Supported Pt Metal Catalysts. Catalysis Communication, https://doi.org/10.1016/j.catcom.2022.106503, 08.09.2022, veröffentlicht

Tan, X., Peng, Q., Subrova, T., Wiener, J., Venkatraman, M., Militky, J., Xiadong, W., Wu, J., Mahendran, A. R., Lammer, H.: High Efficient Removal of Methylene Blue Using Microcrystalline Cellulose/Polyvinyl Alcohol/Expanded Graphite 3D Porous Foam as a “Green” Adsorbent. Research Square, https://doi.org/10.21203/rs.3.rs-1421874/v1, 01.03.2022, veröffentlicht

Tran, A., Konnerth, J., van Herwijnen, H.W.G., Gindl-Altmutter, W.: Low temperature and moisture dependent curing behavior of selected wood adhesives. International journal of adhesion and adhesives, 117, 103178, 04.05.2022, veröffentlicht

Unterweger, C., Ranzinger, M., Duchoslav, J., Piana, F., Pasti, I., Breitenbach, S., Stifter, D., Fürst, C.: Electrically conductive bio-composites based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and wood-derived carbon fillers. Journal of Composites Science, https://www.mdpi.com/2504-477X/6/8/228, 04.08.2022, veröffentlicht

Wolfsgruber, M., da Cruz, M.G.A., Bischof, R.H., Budnyk, S., Beele, B., Monti, S., Barcaro, G., Rodrigues, B.V.M., Paulik, C., Slabon, A.: Electrocatalytic Reduction of Aldonic Acids to Aldoses on Gold Electrodes. ACS Sustainable Chemistry & Engineering, https://doi.org/10.1021/acssuschemeng.2c05576, 20.12.2022, veröffentlicht

Zhang, H., Lei, X., Hu, Q., Wu, S., Aburaia, M., Gonzalez-Gutierrez, J., Lammer, H.: Hybrid Printing Method of Polymer and Continuous Fiber-Reinforced Thermoplastic Composites (CFRTPCs) for Pipes through Double-Nozzle Five-Axis Printer. Polymers, https://doi.org/10.3390/polym14040819, 20.02.2022, veröffentlicht

Anusic, A., Resch-Fauster, K., Mahendran, A.R., Oreski, G., Kern, W.: Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types. Journal of Applied Polymer Science, DOI: 10.1002/app.50239, 04.11.2020, akzeptiert

Averina, E., Konnerth ,J., D’Amico, S., van Herwijnen, H.W.G.: Protein adhesives: alkaline hydrolysis of different crop proteins as modification for improved wood bonding performance. Industrial Crops and Products, 161, 113187, März 2021, veröffentlicht

Becker, C., Oberlercher, H., Heim, R.B., Wuzella, G., Faller, L.M., Riemelmoser, F.O., Nicolay, P., Druesne, F.: Experimental quantification of the variability of the mechanical properties in 3D printed continuous fiber composites. Applied Sciences, 26.10.2021, akzeptiert

Bliem, P., van Herwijnen, H.W.G., Meissl, R., Stadlbauer, W., Konnerth, J.: Engineering of open assembly time of water-based polyvinyl acetate (PVAc) wood adhesives by post-addition of additives. International Journal of Adhesion and Adhesives, https://doi.org/10.1016/j.ijadhadh.2021.103011, 05.10.2021, veröffentlicht

Breitenbach, S., Gavrilov, N., Pašti, I., Unterweger, C., Duchoslav, J., Stifter, D., Hassel, A.W., Fürst, C.: Biomass-derived carbons as versatile materials for energy-related applications – capacitive properties vs. oxygen reduction reaction catalysis. C, 24.07.2021, veröffentlicht

Breitenbach, S., Unterweger, C., Lumetzberger, A., Duchoslav, J., Stifter, D., Hassel, A.W., Fürst, C.: Viscose-based porous carbon fibers: Improving yield and porosity through optimization of the carbonization process by design of experiment. Journal of Porous Materials, 18.01.2021, veröffentlicht

Busquets Ferrer, M., Czabany, I., Vay, O., Gindl-Altmutter, W., Hansmann, C.: Alkali-extracted tree bark for efficient bio-based thermal insulation. Construction and Building Materials, 271, 121577, 15.02.2021, veröffentlicht

Del Pilar Quiroz Galvan, M., Fritz, M.M.C., Simunovic, N., Stern, T., Rauter, R.: Overcoming sustainability challenges with non-profit organisations? Insights from the apparel supply chain. Supply Chain Forum, 22 (2), 115-135, 25.05.2021, veröffentlicht

Derflinger, C., Kamm, B., Paulik, C.: Sustainable aerogels derived from biobased 2,5-difornylfuran and depolymerization products of lignin. International Journal of Biobased Plastics, 3(1) 2021, 29-39. International Journal of Biobased Plastics, 3, 1, 29-39, 03.03.2021, veröffentlicht

Duchoslav, J., Lumetzberger, J.A., Leidlmair, D., Kehrer, M., Säckl, G., Breitenbach, S., Unterweger, C., Fürst, C., Stifter, D.: Development of a method for vapour phase trimethylsilylation of surface hydroxyl groups. Surfaces and Interfaces, 23.01.2021, veröffentlicht

Dvořáček, O., Lechowicz, D., Haas, F., Frömel-Frybort, S.: Cutting force analysis of oak for the development of a cutting force model. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2021.1955296, 26.07.2021, veröffentlicht

Dvořáček, O., Lechowicz, D., Krenke, T., Möseler, B., Tippner, J., Haas, F., Emsenhuber, G., Frömel-Frybort, S.: Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors. The International Journal of Advanced Manufacturing Technology, https://doi.org/10.1007/s00170-021-06769-1, 10.02.2021, veröffentlicht

Enengl, C., Lumetzberger, A., Duchoslav, J., Mardare, C., Ploszczanski, L., Rennhofer, H., Unterweger, C., Stifter, D., Fürst, C.: Influence of the carbonization temperature on the properties of carbon fibers based on technical softwood kraft lignin blends. Carbon Trends, 08.08.2021, veröffentlicht

Espana-Orozco, S., Bischof, R.H., Barbini, S., Sriranganadane, D., Fackler, K., Potthast, A.: Fate of lipophilic wood extractives in oxygen-based cellulose bleaching. ACS Sustainable Chemistry & Engineering, 24.03.2021, veröffentlicht

Fehlhofer, M., Bock, P., Xiao, N., Preimesberger, C., Lindemann, M., Hansmann, C., Gierlinger, N.: Oakwood drying: precipitation of crystalline ellagic acid leads to discoloration. Holzforschung, https://doi.org/10.1515/hf-2020-0170, 06.01.2021, veröffentlicht

Frömel-Frybort, S., Bliem, P., Möseler, B, Krenke, T., Mauritz, R., Müller, U.: Influence of disintegration technologies on particle structure and its mechanical properties. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2020.1778078, Juni 2020, veröffentlicht

Fuhrmann, M., Schwarzbauer, P., Hesser, F.: Integration of market aspects into material development: approach and exemplification for a wood composite. European Journal of Wood and Wood Product, 79 (5), 1325-1336, 06.04.2021, veröffentlicht

Fürtner, D., Ranacher, L., Perdomo, E.A., Schwarzbauer, P., Hesser, F.: Locating hotspots for the Social Life Cycle Assessment of bio-based products from Short Rotation Coppice. BioEnergy Research, 14, 510-533, 25.03.2021, veröffentlicht

Gattermayr, F., Herwig, C., Leitner, V.: Effect of changes in continuous carboxylate feeding on the specific production rate of butanol using Clostridium saccharoperbutylacetonicum. Bioresource Technology, Vol 332, 03.04.2021, veröffentlicht

George, G., Selvakumar, M., Mahendran, A.R., Srinivasan, A.: Influence of MWCNTs on the structure and properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide) nanocomposite. Polymer Composties, https://doi.org/10.1002/pc.26158, 07.06.2021, akzeptiert

Hoheneder, R., Fitz, E., Bischof, R.H., Russmayer, H., Ferrero, P., Peacock, S., Sauer, M.: Efficient conversion of hemicellulose sugars from spent sulfite liquor into optically pure L-lactic acid by Enterococcus mundtii. Bioresource Technology, 27.04.2021, veröffentlicht

Janesch, J., Gusenbauer, C., Gindl-Altmutter, W., Hansmann, C.: Efficient Wood Hydrophobization Exploiting Natural Roughness Using Minimum Amounts of Surfactant-Free Plant Oil Emulsions. ACS Omega, 6, 34, 22202–22212, 17.08.2021, veröffentlicht

Jaxel, J., Gusenbauer, C., Böhmdorfer, S., Liebner, F., Hansmann, C.: Improving single-step scCO2 dyeing of wood by DMSO-induced micro-swelling. Journal of Supercritical Fluids, https://doi.org/10.1016/j.supflu.2020.104978, 01.11.2020, veröffentlicht

Jocham, C.: VDI 2015 Blatt 1 Pulverbeschichtung von MDF und anderen Holzwerkstoffen. VDI Richtline, 13.07.2021, veröffentlicht

Khalifa, M., Anandhan, S.: Highly sensitive and wearable NO2 gas sensor based on PVDF nanofabric containing embedded polyaniline/g-C3N4 nanosheet composite. Nanotechnology, 10.1088/1361-6528/ac1f54, 01.09.2021, veröffentlicht

Khalifa, M., Schöffmann, E., Lammer, H., Mahendran, A.R., Wuzella, G., Anandhan, S.: A study on electroactive PVDF/mica nanosheet composites with enhanced γ-phase for capacitive and piezoelectric force sensing. Soft Matter, 10.1039/D1SM01236C, 08.11.2021, veröffentlicht

Khalifa, M., Wuzella, G., Bagawan, A.W., Lammer, H., Mahendran, A.R.: Poly (vinylidene fluoride)/Mica nanocomposite: A potential material for photovoltaic backsheet application. Materials Chemistry and Physics 10.1016/j.matchemphys.2021.125551, 12.08.2021, veröffentlicht

Kumpenza, C., Pramreiter, M., Nenning, T.J., Bliem, P., Reiterer, R., Konnerth, J., Müller, U.: Temperature-related tensile modulus of polymer-based adhesive films. The Journal of Adhesion, https://doi.org/10.1080/00218464.2021.2011239, 01.12.2021, veröffentlicht

Ludvig, A., Braun, M., Hesser, F., Ranacher, L., Fritz, D., Gschwantner, T., Jandl, R., Kindermann, G., Ledermann, T., Pölz, W., Schadauer, K., Schmid, B. F., Schmid, C., Schwarzbauer, P., Weiss, G., Wolfslehner, B., Weiss, P.: Comparing policy options for carbon efficiency in the wood value chain: Evidence from Austria. Journal of Cleaner Production, 292, 125985, 10.04.2021, veröffentlicht

Mahlknecht, J., Wuzella, G., Lammer, H., Khalifa, M.: Smart Functional Surfactant Activated Conductive Polymer Coated on Paper with Ultra-Sensitive Humidity Sensing Characteristics. Materials Advances, akzeptiert

Milakin, K.A., Morávková, Z., Acharya, U., Kašparová, M., Breitenbach, S., Taboubi, O., Hodan, J., Hromádková, J., Unterweger, C., Humpolíček, P., Bober, P.: Enhancement of conductivity, mechanical and biological properties of polyaniline-poly(N-vinylpyrrolidone) cryogels by phytic acid. Polymer, 20.01.2021, veröffentlicht

Minisy, I., Acharya, U., Veigel, S., Morávková, Z., Taboubi, O., Hodan, J., Breitenbach, S., Unterweger, C., Gindl-Altmutter, W., Bober, P.: Sponge-like polypyrrole–nanofibrillated cellulose aerogels: synthesis and application. Journal of Materials Chemistry C, 13.08.2021, veröffentlicht

Myna, R., Wimmer, R., Liebner, F., Leiter, L., Frömel-Frybort, S.: Triboelectric charging of dust particles during hand-held circular sawing of wood and wood-based materials. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2020.1830850, 02.01.2021, veröffentlicht

Palubicki, B., Hlaskova, L., Frömel-Frybort, S., Rogozinski, T.: Feed force and sawdust geometry in particleboard sawing. Materials, https://doi.org/10.3390/ma14040945, 17.01.2021, veröffentlicht

Patsch, R., Frömel-Frybort, S., Stanzl-Tschegg, S.: Ash-burn test according to ISO 3340 for the evaluation of the abrasive effect of particleboard on cutting tools. Wood Materials Science and Engineering, https://doi.org/10.1080/17480272.2021.1923061, 05.05.2021, veröffentlicht

Patsch, R., Frömel-Frybort, S., Stanzl-Tschegg, S.: The influence of the recycled wood proportion in particle boards to the tool life of milling tools. Wood Material Science and Engineering, https://doi.org/10.1080/17480272.2020.1826578, Oktober 2020, veröffentlicht

Perdomo, E.A., Schwarzbauer, P., Fürtner, D., Hesser, F.: Life Cycle Assessment of Agricultural Wood Production – Methodological Options: a Literature Review. BioEnergy Research, 14, 492-509, 10.03.2021, veröffentlicht

Ranacher, L., Stocker, R., Riegler, M., Schwarzbauer, P., Hesser, F.: Digitalization of small and medium sized sawmills in Austria: A survey about business processes. European Journal of Wood and Wood Products, akzeptiert

Rennhofer, H., Köhnke, J., Keckes, J., Tintner, J., Unterweger, C., Zinn, T., Deix, K., Lichtenegger, H., Gindl-Altmutter, W.: Pore Development during the Carbonization Process of Lignin Microparticles Investigated by Small Angle X-ray Scattering. Molecules, 06.04.2021, veröffentlicht

Sarosi, O., Bammer, D., Fitz, E., Potthast, A.: Partial exchange of ozone by electron beam irradiation shows better viscosity control and less oxidation in cellulose upgrade scenarios. Carbohydrate Polymers, 07.04.2021, veröffentlicht

Sarosi, O., Sulaeva, I., Fitz, E., Sumerskii, I., Bacher, M., Potthast, A.: Lignin Resists High-Intensity Electron Beam Irradiation. Biomacromolecules, 10.09.2021, veröffentlicht

Schlackl, K., Herchl, R., Almhofer, L., Bischof, R.H., Fackler, K., Samhaber, W.: Intermolecular Interactions in the Membrane Filtration of Highly Alkaline Steeping Lye. Membranes, 11, 2, 88, 27.01.2021, veröffentlicht

Schmid, M., Altmann, D., Steinbichler, G.: A Simulation-Data-Based Machine Learning Model for Predicting Basic Parameter Settings of the Plasticizing Process in Injection Molding. Polymers for Advanced Technologies, 10.08.2021, veröffentlicht

Seidl, R., Weiss, S., Kessler, R.W., Kessler, W., Zikulnig-Rusch, E.M., Kandelbauer, A.: Prediction of Residual Curing Capacity of Melamine-Formaldehyde Resins at an Early Stage of Synthesis by In-Line FTIR Spectroscopy. Polymers, 31.07.2021, veröffentlicht

Sailer-Kronlachner, W., Thoma, C., Böhmdorfer, S., Bacher, M., Konnerth, J., Rosenau, T., Potthast, A., Solt-Rindler, P., van Herwijnen, H.W.G.: Sulfuric acid-catalyzed dehydratisation of carbohydrates for the production of adhesive precursors. ACS Omega, 6, 16641, 15.06.2021, veröffentlicht

Stockinger, T., Wirthl, D., Mao, G., Drack, M., Pruckener, R., Demchyshyn, S., Steiner, M., Egger, F., Müller, U., Schwödiauer, R., Bauer, S., Arnold, N., Kaltenbrunner, M.: iSense: A Fiber-Based, Highly Permeable and Imperceptible Sensor Design. Advanced Materials (Impact factor 27), 03.08.2021, veröffentlicht

Thoma, C., Solt-Rindler, P., Sailer-Kronlacher, W., Rosenau, T., Potthast, A., Konnerth, J., Pellis, A., van Herwijnen, H.W.G.: Dataset for chemorheological analysis and rheokinetic study of carbohydrate-hydroxymethylfurfural-amine adhesives. Data in Brief, 39, 107465, Oktober 2021, veröffentlicht

Thoma, C, Solt-Rindler, P., Sailer-Kronlacher, W., Rosenau, T., Potthast, A., Konnerth, J., van Herwijnen, H.W.G.: Carbohydrate-hydroxymethylfurfural-amine adhesives: Chemorheological analysis and rheokinetic study. Polymer, 231, 124128, August 2021, veröffentlicht

Tomec, D.K., Straže, A., Haider, A., Kariž, M.: Hygromorphic response dynamics of 3D-printed wood-PLA composite bilayer actuators. Polymers, 22.09.2021, veröffentlicht

Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Faludi, G., Móczó, J., Pukanszky, B.: Impact modification of fiber reinforced PP composites with flexible PET fibers. Polymer International, 04.03.2021, veröffentlicht

Várdai, R., Lummerstorfer, T., Pretschuh, C., Jerabek, M., Gahleitner, M., Bartos, A., Móczó, J., Anggono, J., Pukanszky, B.: Improvement of the impact resistance of natural fiber reinforced PP composites through hybridization. Polymers for Advanced Technologies, 06.04.2021, veröffentlicht

Vijyakumar, C.T., Mahendran, A.R., Thangamani, R., Venugopalan, R.: Castor Oil and HER Based Polyurethanes: Synthesis, Characterization and Structure-Thermal Stability Relation. Polymer Korea, 10.7317/pk.2021.45.4.511, Juli 2021, veröffentlicht

Vay, O., Busquets Ferrer, M., Emsenhuber, G., Huber, C., Gindl-Altmutter, W., Hansmann, C.: Thermal conductivity of untreated and chemically treated poplar bark and wood. Holzforschung, https://doi.org/10.1515/hf-2020-0268, 06.08.2021, veröffentlicht

Weiss, S., Seidl, R., Kessler, W., Kessler, R.W., Zikulnig-Rusch, E.M., Kandelbauer, A.: Multivariate process trajectories for molecular description of MF thermal curing and correlation with hydrolytic stability. Journal of Applied Polymer Science, doi/10.1002/app.50635, 25.02.2021, veröffentlicht

Weiss, S., Seidl, R., Kessler, W., Kessler, R.W., Zikulnig-Rusch, E.M., Kandelbauer, A.: Multivariate Curve Resolution (MCR) of real-time infrared spectra for analyzing the curing behavior of solid MF thermosetting resin. Journal of Adhesion & Adhesives, https://doi.org/10.1016/j.ijadhadh.2021.102956, 2021, veröffentlicht

Zeilerbauer, L., Lindorfer, J., Süss, R., Kamm, B.: Techno-economic and life cycle assessment of a wood chips-based organosolv biorefinery. Biofuels, Bioproducts Biorefining (Publisher Wiley), 16.11.2021, veröffentlicht

Zikulnig, J., Khalifa, M., Rauter, L., Lammer, H., Kosel, J.: Low-Cost Inkjet-Printed Temperature Sensors on Paper Substrate for Structural Health Monitoring of Natural Fiber-Reinforced Lightweight Components. Chemosensors, https://doi.org/10.3390/chemosensors9050095, 27.04.2021, veröffentlicht